S65.20-4604-09
Shown on left side of vehicle |
1 | Side roof frame |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | General information on body repair | ||
General information on MB materials | |||
| Remove | ||
1 | Remove all detachable parts in area to be repaired | ||
2 | Cover all detachable parts remaining in vehicle with welding protection blankets | Commercially available devices/tools | |
3 | Remove complete side roof paneling | ||
4 | Remove front roof frame | ||
5 | Remove multipiece A-pillar | ||
6 | Remove B-pillar complete | ||
7 | Remove side roof frame (1) | ||
Commercially available devices/tools | |||
1K-zinc dust paint | |||
8 | Prepare side roof frame (1) for installation | ||
Commercially available devices/tools | |||
1K-zinc dust paint | |||
| Install | ||
Danger | The high voltage used for electric welding presents a lethal hazard. Risk of explosion from welding in areas close to highly inflammable materials. Risk of injury from weld splatter and UV-light when welding. Risk of poisoning from inhaling welding gases | Use insulating mats. Wear protective clothing, safety glasses and a protective mask. Remove highly inflammable materials from the hazard area. Use air extraction system. | |
9 | Install side roof frame (1) | ||
Topical note | Measures for preventing damage to components when performing electric welding and soldering work | ||
| 000 588 01 84 00 Welder | ||
| 000 588 02 84 00 Welder | ||
Commercially available devices/tools | |||
1K-zinc dust paint | |||
Side portal frame | |||
10 | Install B-pillar complete | ||
11 | Install multipiece A-pillar | ||
12 | Install front roof frame | ||
13 | Completely install side roof paneling | ||
14 | Install all detachable body components in area to be repaired |
210 589 17 23 00
Side portal frame