Replace complete B-pillar

AR63.20-S-1350P

14.05.2019

Model

470, 471

Shown on left side of vehicle

1	Inner B-pillar
2	Multipiece B-pillar

S63.20-4952-06

 Danger	Risk of death caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
 Caution	Risk of injury caused by scraping or cutting body parts on sharp vehicle parts	Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels.	AS00.00-Z-0017-01A
Topical note	Special instructions for lifting and supporting vehicle		AH00.60-N-0100-01P
Topical note	General information on body repair		AH60.00-N-0001-01A
	General information on MB materials		AH98.00-P-9409-03A
	Remove
1	Remove all detachable parts in area to be repaired
2	Cover all detachable parts remaining in vehicle with welding protection blankets	 Commercially available devices/tools Welding protection blanket
3	Remove multipiece B-pillar (2)		AR63.20-S-1117P
4	Cut off inner B-pillar (1)		AR63.20-S-1350-01P
		 Commercially available devices/tools Spot weld milling machine Angular grinder Rotary wire brush Wet and dry vacuum cleaner
		Zinc dust paint suitable for spot welding	*BR00.45-Z-1001-07A
5	Prepare inner B-pillar (1) for installation		AR63.20-S-1350-02P
		 Commercially available devices/tools Hand drill Rotary wire brush Wet and dry vacuum cleaner
		Zinc dust paint suitable for spot welding	*BR00.45-Z-1001-07A
	Install
 Danger	The high voltage used for electric welding presents a lethal hazard. Risk of explosion from welding in areas close to highly inflammable materials. Risk of injury from weld splatter and UV-light when welding. Risk of poisoning from inhaling welding gases	Use insulating mats. Wear protective clothing, safety glasses and a protective mask. Remove highly inflammable materials from the hazard area. Use air extraction system.	AS00.00-Z-0007-01A
6	Install inner B-pillar (1)		AR63.20-S-1350-03P
Topical note	Measures for preventing damage to components when performing electric welding and soldering work		AH60.00-P-0001-02A
	000 588 01 84 00 Welder		WS60.00-P-0021K
	000 588 02 84 00 Welder		WS60.00-P-0022K
		 Commercially available devices/tools Clamping pliers (Standard) Rotary wire brush Wet and dry vacuum cleaner
		Zinc dust paint suitable for spot welding	*BR00.45-Z-1001-07A
		 Side portal frame	*210589172300
7	Install multipiece B-pillar (2)		AR63.20-S-1117P
8	Remove welding protection blankets	 Commercially available devices/tools Welding protection blanket
9	Install all detachable body components in area to be repaired

210 589 17 23 00

Side portal frame

Repair materials

Number	Designation	Order number
BR00.45-Z-1001-07A	Zinc dust paint suitable for spot welding	A 000 986 34 42

เอกสารที่อ้างถึง