Remove/install air spring bellows at front cab mounting

AR60.80-W-0030A

10.11.11

BODY 942.899 in MODELS 950.0 /1 /2 /3, 952.0 /1 /2 /3, 953.1 /3, 954.0 /1 /2 with CODE (FL2) Air-sprung comfort cab suspension

BODY 943.899 in MODELS 930.0 /1 /2 /3, 932.0 /1 /2 /3, 933.1 /3, 934.0 /1 /2 with CODE (FL2) Air-sprung comfort cab suspension

W60.80-0016-06

1 Screw

2 Nut

3 Air spring bellows

4 Articulated rod

5 Compressed-air line

6 Washer

7 Nut

 	Remove/install
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
1	Bleed air suspension circuit
2	Open front flap
3	Unhook articulated rod (4)
4	Detach compressed-air line (5)	With compressed air connection system "VOSS 230".	AR42.10-W-0900A
		With compressed air connection system "VOSS 232" (NG 8, 12) or "SCHÄFER SDF" (NG 6).	AR42.10-W-0900C
		 Installation: Check O-ring, replace if necessary.
	Notes on compressed air connection systems		AH00.18-N-0001-01A
5	Remove air bellows (3)
	Slightly lift cab with assembly linkage. Pull air spring bellows (3) out of upper mount and pivot toward front.	Assembly devices for cab, commercial vehicle, etc. gotis://G_68-80_01.0
		Body 942.899	*BA60.80-N-1005-01B
		Body 942.899	*BA60.80-N-1006-01B
		Body 943.899	*BA60.80-N-1027-01B
		Body 943.899	*BA60.80-N-1028-01B
6	Install in the reverse order

 Cab mounting

Number	Designation				Body 943.899 in model 930, 932, 933, 934, with code FL2 or FL4	Body 942.899 in model 950.0/1/2/3, 952.0/1/2/3, 953.1/3, 954.0/1/2


BA60.80-N-1005-01B	Nut, air bellows to front cab mounting	M141.5		Nm	-	135
BA60.80-N-1006-01B	Nut, air bellows to bearing bracket	M141.5		Nm	-	180
BA60.80-N-1027-01B	Bolt, shock absorber to bottom of bearing bracket of front cab mounting	M121.5		Nm	-	-
		M141.5	Stage 1	Nm	150	-
			Stage 2	°	90	-
BA60.80-N-1028-01B	Bolt, shock absorber to bearing bracket at top of front cab mounting	M121.5		Nm	-	-
		M141.5		Nm	150	-