AR60.10-D-5010A | Set up straightening bench, straightening set for front repair | 1.8.95 |
MODELS 901.061 /361 /371 /461, 902.061 /071 /361 /371 /461 /471, 903.061 /071 /361 /371 /461 /471 with CODE (G40) Automatic transmission
MODELS 901.461, 902.461, 903.461 with TRANSMISSION 711.612 with CODE (N05) Countershaft PTO (2c) without flange
MODELS 901.461, 902.461, 903.461 with TRANSMISSION 711.612 with CODE (N07) PTO countershaft (2b) with flange
D60.10-0040-09
D60.10-0041-09
1 Support for front cross member 7001.7001 (for MZ.260)
2 Support for front cross member 7001.7002 (for MZ.260)
3 Basic carrier 7001.7003 (for mounts 5 and 6 and centering pin V.29)
4 Base carrier 7001.7004 (for support 5 and 6 and centering pin V.29)
5 Support for securing floor panel 7001.7005 (for base carrier 3 and 4)
6 Mount for floor sheet attachment 7001.7006 (for basic carriers 3, 4)
7 Support for front axle attachment to front longitudinal member 7001.7007 (for MZ.260)
8 Mount for front axle attachment to front longitudinal member 7001.7008 (for MZ.260)
9 Support for suspension strut bracket 7001.7009 (for MZ.260) except all-wheel drive
7001.7043 (for MZ.260) all-wheel drive only
27 Base carrier for rear spring, front spring bearing bracket 7001.7027 (with spring installed and removed, all 2.5-4.6 t except platform/crewcab 2.5-3.5 t)
28 Mounts 7001.7028 (for basic carriers 26 and 27)
34 Reducing bush to width across flats
18 mm 7001.7034
(for fixture 28)
40 Fixtures 7001.7040 (for front longitudinal member, on rear engine support)
41 Support 7001.7041 (for mounting front longitudinal member at rear engine support)
V.29 Centering pin for front longitudinal member (for basic carriers 3 and 4)
T.034 Centering pin (for fixtures 40 and 41)
T.039 Centering pin (for fixtures 7 and 8)
A1 Modular member 955.741
B1 Modular member 955.742
C Modular member 955.715/955.703
D Modular member 955.704
MZ.200 Support
MZ.260 Support
10 Mount for suspension strut bracket 7001.7010 (for MZ.260) except all-wheel drive
7001.7044 (for MZ.260) only all-wheel drive
11 Checking and locating plate 7001.7011 (for support 9 and 10)
12 Support for front axle attachment to rear longitudinal member 7001.7012 (for MZ.260)
13 Mount for front axle attachment to rear longitudinal member 7001.7013 (for MZ.260)
16 Support for rear engine mount support 7001.7016 (for MZ.200)
17 Mount for rear engine mount base 7001.7017 (for MZ.200)
18 Mount for front propeller shaft bearing console 7001.7018 (for MZ.260)
26 Base carrier for rear spring, front spring bearing bracket 7001.7026 (with spring installed and removed, all 2.5-4.6 t except platform/crewcab 2.5-3.5 t)
Fig. item etc. | Work instructions | ||
| Notes on aligning and welding work on shock absorber strut mount | Models 903, 904 for all-wheel drive vehicles | |
| Set up Celette straightening bench modular members | Modular members A1, B1, C, D | |
| Set up straightening bracket set for front end repairs | Always install assembly groups with item number circled. | |
9, 10 | Mount for spring strut console | ||
11 | Checking and locating plate 7001.7011 (for support 9 and 10) | Install check and attachment plate when performing repair or check work. | |
16, 17 | Support with bracket MZ.200 | Lock mounts in bottom hole with jack stands in upper hole. | |
18 | Mount with jack stand MZ.260 | Lock mount in bottom hole with jack stand in upper hole | |
26, 27 | Basic carrier | Screw basic carrier to modular member according to hole pattern C. | |
34 | Reducing bushes to WAF, 18 mm | Set in mounts 28. |
Workshop equipment
WE58.40-Z-1008-01B | Straightening set and attachment parts 7001.300 (Sprinter, except all-wheel drive Sprinter) |
WE58.40-Z-1009-01B | Body lifting jack |
WE58.40-Z-1012-01B | Extended straightening bracket set 7001.309 for all-wheel Sprinter for straightening bracket set 7001.300 |