AR60.10-D-5010-02A | Set up straightening bracket set for front end repairs | ||
| Notes on aligning and welding work on shock absorber strut mount | Models 903, 904 on all-wheel drive vehicles |
Workshop equipment
WE58.40-Z-1008-01B | Straightening set and attachment parts 7001.300 (Sprinter, except all-wheel drive Sprinter) |
WE58.40-Z-1009-01B | Body lifting jack |
WE58.40-Z-1012-01B | Extended straightening bracket set 7001.309 for all-wheel Sprinter for straightening bracket set 7001.300 |
D60.10-0022-11
The installation description applies in the same way for the left and right sides for front end repairs.
The part numbers of the supports are cast on the side.
1 Attach supports with hex. head bolts (1) and nuts (2) present in modular members.
D60.10-0023-11
The part numbers and arrows are indicated on the straightening angles. When set up correctly, the arrows point in the direction of motion. The straightening tools for the left-hand side of the vehicle are also stamped with an "L" next to the arrow.
D60.10-0025-02
D60.10-0024-02
1 Mount for front crossmember 7001.7001 (for MZ.260)
2 Mount for front cross member 7001.7002 (for MZ.260)
3 Basic carrier 7001.7003 (for mounts 5 and 6 and centering pin V.29)
4 Base carrier 7001.7004 (for support 5 and 6 and centering pin V.29)
5 Mount for securing floor panel 7001.7005 (for base carrier 3 and 4)
6 Mount for floor sheet attachment 7001.7006 (for basic carriers 3 and 4)
V.29 Centering punch for front longitudinal member support (for basic carriers 3 and 4)
MZ.260 Support
D60.10-0027-02
D60.10-0026-02
7 Mount for front axle attachment to front longitudinal member 7001.7007 (for MZ.260)
8 Mount for front axle attachment to front longitudinal member 7001.7008 (for MZ.260)
9 Mount for spring strut console 7001.7009 (for MZ.260) except all-wheel drive
7001.7043 (for MZ.260) all-wheel drive only
10 Mount for spring strut console 7001.7010 (for MZ.260) except all-wheel drive
7001.7044 (for MZ.260) only all-wheel drive
11 Checking and locating plate 7001.7011 for supports 9 and 10)
T.039 Centering punch (for mounts 7 and 8)
MZ.260 Support
D60.10-0029-02
D60.10-0028-02
12 Mount for front axle attachment to rear longitudinal member 7001.7012 (for MZ.260)
13 Mount for front axle attachment to rear longitudinal member 7001.7013 (for MZ.260)
14 Intermediate plate 7001.7014 for mounts 16 and 17 for MZ.200)
15 Intermediate plate 7001.7015 (for mounts 16 and 17 for MZ.200)
16 Mount for rear engine mount support 7001.7016 (for MZ.200)
17 Mount for rear engine mount base 7001.7017 (for MZ.200)
MZ.200 Support
MZ.260 Support
D60.10-0031-02
D60.10-0030-02
18 Mount for front propeller shaft bearing console 7001.7018 (for MZ.260)
19 Mount for rear propeller shaft bearing bracket 7001.7019 (for MZ.260)
MZ.200 support
MZ.260 Support
Adapter (19) with support MZ.200 set up only with :
Vehicles with wheelbase of 3550 mm and gasoline engine (M111),
Vehicles with wheelbase 4025 mm.
D60.10-0033-02
D60.10-0032-02
20 Mount for rear spring, front spring bearing bracket 7001.7020 (for MZ.260, with spring installed and removed, only for platform vehicle/crewcab 2.5-3.5 t)
21 Mount for rear spring, front spring bearing bracket 7001.7021 (for MZ.260, with spring installed and removed, only for platform vehicle/crewcab 2.5-3.5 t)
26 Base carrier for rear spring, front spring bearing bracket 7001.7026 (with spring installed and removed, all 2.5-4.6 t except platform vehicle/crewcab 2.5-3.5 t)
27 Base carrier for rear spring, front spring bearing bracket 7001.7027 (with spring installed and removed, all 2.5-4.6 t except platform vehicle/crewcab 2.5-3.5 t)
28 Mounts 7001.7028 (for basic carriers 26 and 27)
34 Reducer sleeves to wrench size
18 mm 7001.7034 (for mounts 28, for all 2.5-3.5 t)
MZ.260 Support
D60.10-0034-02
40 Mount 7001.7040 (for front longitudinal member base, at rear engine support)
41 Mount 7001.7041 (for front longitudinal member base, at rear engine support)
T.034 Centering punch (for mounts 40 and 41)