Remove/install combination switch

AR54.25-W-2800A

Remove/install combination switch

27.02.2018

Model

375.1 with body 375.830

Model

375.3 with body 375.810

Model

375.4 with body 375.840

Model

944 with body 944.899

Model

950.0/1/2/3, 952.0/1/2/3, 953.1/3, 954.0/1/2 with body 942.899

Model

950.5/6, 952.5/6, 953.6, 954.5 with body 940.899

Model

970, 972, 974, 975, 976 with body 972.899

1

Bolts

S25

Combination switch

 

Remove/install

1

Switch off ignition.

2

Remove steering wheel.

AR46.10-W-0100A

3

Remove trim from steering column.

4

Remove left footwell cover.

Model 950.0/1/2/3./, 952.0/1/2/3./, 953.1/3., 954.0/1/2

AR68.30-W-1310A

Model 375, 944, 950.5/6, 952.5/6, 953.6, 954.5, 970, 972, 974, 975, 976

AR68.30-W-1310B

5

Remove clock spring contact.

AR46.10-W-0200A

6

Disconnect electrical connector of combination switch (S25) in driver footwell.

7

Remove combination switch (S25).

 Installation:
Do not precut threaded holes when installing a new combination switch (S25).
The screws/bolts (1) may only be changed in the intended installation position of the combination switch (S25) otherwise the retaining lug of the high beam position in the combination switch (S25) will be destroyed.

8

Install in the reverse order.