T47.10-0004-06
1 Fuel tank
2 Connecting pipe
3 Return flow pipe
4 Heater feed line
7 Nut
T47.10-0005-01
Illustraton shows right side of vehicle
5 Pressure compensation line
6 Air admission and release valve line
8 Retaining strap
| Remove/install | ||
Danger! | Risk of explosion from fuel igniting, risk of poisoning from inhaling and swallowing fuel as well as risk of injury to eyes and skin from contact with fuel. | No fire, sparks, naked flames or smoking. Wear protective clothing when handling fuel. | |
1 | Remove fuel gage sensor | ||
2 | Take off underbody panel in area of fuel tanks (1) and of connection pipe (2) | ||
3 | Detach return flow line (3) and feed line of heater (4) from connection pipe (2) | ||
4 | Take off connection pipe (2) at the fuel tanks (1) | The connection pipe is linked to the fuel tanks by flexible hoses and hose clamps. | |
5 | Detach pressure compensation line (5) and line (6) of air admission and release valve of tank filler neck | Also detach the pressure compensation line (5) at the lef tfuel tank. | |
6 | Screw down nuts (7) and take out the retaining straps (8) of the fuel tanks (1) | The fuel tanks are attached on each side by 4 nuts. | |
7 | Take out fuel tanks (1) | ||
8 | Install in the reverse order |