T47.10-0004-06
1 Fuel tank
2 Connecting pipe
3 Return flow pipe
4 Heater feed line
7 Nut
T47.10-0005-01
Illustraton shows right side of vehicle
5 Pressure compensation line
6 Air admission and release valve line
8 Retaining strap
| Remove/install | ||
Danger! | Risk of explosion from fuel igniting, risk of poisoning from inhaling and swallowing fuel as well as risk of injury to eyes and skin from contact with fuel. | No fire, sparks, naked flames or smoking. Wear protective clothing when handling fuel. | |
1 | Remove fuel gage sensor | ||
2 | Take off underbody panel in area of fuel tanks (1) and of connection pipe (2) | ||
3 | Detach return flow line (3) and feed line of heater (4) from connection pipe (2) | ||
4 | Take off connection pipe (2) at the fuel tanks (1) | The connection pipe is linked to the fuel tanks by flexible hoses and hose clamps. | |
5 | Detach pressure compensation line (5) and line (6) of air admission and release valve of tank filler neck | Also detach the pressure compensation line (5) at the lef tfuel tank. | |
6 | Screw down nuts (7) and take out the retaining straps (8) of the fuel tanks (1) | The fuel tanks are attached on each side by 4 nuts. | |
7 | Take out fuel tanks (1) | ||
8 | Install in the reverse order |
Referenced documents
- ar4710t7000b Remove/install fuel gage sensor
- ar6145t100001b Remove/install underbody cladding
- as4700z000101a Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.