Remove/install track rod

AR46.40-P-0200I

Remove/install track rod

27.9.97

10.9.03

Reference to adjusting toe on front axle replaced by reference to chassis alignment check

Step 5

 

Remove/install

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A



Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

1

Remove front wheel



Remove/install wheels, rotate if necessary

AP40.10-P-4050Z

2

Pry off tie rod joint (10a) from steering knuckle assembly.

 Installation: Replace self-locking nut.

AR46.40-P-0200-02I

 Thrust piece

*140589006300

 Puller

*124589033300



*BA46.40-P-1001-01E



Dimensions of tie rod ball joints have been modified

Model 220

BT46.40-P-0002-01A

3

Release locknut (10f) and unscrew track rod (10)

 Counterhold tie rod (10) for loosening the jam nut (10f) (arrow).



*BA46.40-P-1002-01E

4

Install in the reverse order

5

Perform chassis alignment

Model 203, 209

AR40.20-P-0200P

Model 215, 220 except 220.175/178/875/878

AR40.20-P-0200I

Model 220.175/178

AR40.20-P-0200MB

Model 220.875/878

AR40.20-P-0200MP

Model 230

AR40.20-P-0200R

Number

Designation

Model 203
except models 203.081/084/
087/092/281/
284/287/292

Model 209

Model 215

Model 220 except models
220.083/
084/087/
183/184/
187

BA46.40-P-1001-01E

Self-locking nut, tie rod to steering knuckle

1st stage

Nm

50

50

50

50

Stage 2

°

60

60

60

60

BA46.40-P-1002-01E

Lock nut, tie rod to inner tie rod

Nm

60

60

60

60

Number

Designation

Model
230

BA46.40-P-1001-01E

Self-locking nut, tie rod to steering knuckle

1st stage

Nm

50

Stage 2

°

60

BA46.40-P-1002-01E

Lock nut, tie rod to inner tie rod

Nm

60