Remove/install steering wheel

AR46.10-P-0100CW

29.03.2018

Model

204, 207

Modification notes

29.03.2018	General information added.
29.03.2018	Information on handling bolt revised.	Operation step 3

Shown on model 204.0 up to model year 2012

1	Steering wheel
1s	Screw

P46.10-2820-05

Shown on model 204.9 as of model year 2013 with code 442 (Comfort multifunction steering wheel)

1	Steering wheel
2	Electrical connector

P46.10-3320-06

Topical note	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
	Notes on safety-relevant components		AH00.00-Z-0019-01A
 	Remove/install
1	Turn steering wheel (1) to center position.	 The front wheels must be in the straight-ahead position.
2	Remove airbag unit from steering wheel (1).	Model 204.0/2 up to model year 2012 Model 204.9 up to model year 2013	AR91.60-P-0660CW
		Model 204.0/2, 207 as of model year 2012 Model 204.3 Model 204.9 as of model year 2013	AR91.60-P-0660EL
		Model 207 up to model year 2012	AR91.60-P-0660EW
3	Counterhold steering wheel (1) and remove bolt (1s).	 Installation: Reuse bolt (1s) and mark with a non-water-soluble pen (color dot).
		 Screw/bolt, steering wheel to steering shaft	*BA46.10-P-1001-02J
		If the bolt (1s) already bears a marking (color dot)
		
		Replace bolt (1s).
4	Remove steering wheel (1) far enough to gain access to electrical connector (2) then disconnect electrical connector (2).	Model 204, 207 with code 442 (Luxury multifunction steering wheel)
5	Remove steering wheel (1).	 Installation: Align recesses of the splines (arrow) in the steering wheel (1) with the markings on the steering shaft.
6	Install in the reverse order.
7	Conduct a road test.

 Steering wheel

Number	Designation		Model 204	Model 207
BA46.10-P-1001-02J	Screw/bolt, steering wheel to steering shaft	Nm	80	80