AR43.05-D-1320E | Remove/install vacuum pump | 13.1.10 |
MODEL 901.6, 902.6, 903.6, 904.6 with ENGINES 611.981 /987
MODEL 902.6, 903.6, 904.6, 905.6 with ENGINE 612.981
MODEL 690.6 with ENGINE 611.983
D43.05-1101-05
1 Vacuum pump
2 Vacuum line
3 Sealing ring
4 Sealing ring
5 Exhaust camshaft
6 Screw
| Remove/install | ||
1 | Disconnect vacuum line (2) from vacuum pump (1) | Compress catches (arrows) and pull off vacuum line (2) | |
2 | Detach bracket of oil dipstick guide tube on cylinder head | ||
3 | Unscrew bolts (6) from vacuum pump (1) | | |
4 | Pull off vacuum pump (1) towards the front | Installation: Insert the driver on the rear of the pump into the driver on the camshaft. Replace sealing rings (3, 4) and clean sealing surface | |
5 | Install in the reverse order | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
6 | Inspect for oil leaks | Allow engine to run until warm, then turn off engine and check for leaks |
Vacuum pump