ar3531s0545s

Replace radial sealing rings on side of rear axle center assembly

ประเภท ar · หัวข้อ 35.31 · เวอร์ชัน 0600 · 2018-09-08

ใช้กับ: Model 636 Model 639 except code MA0 (E-CELL 60 kW)

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 2 Chassis › 35 Rear axle › 35.31 Rear axle center assembly — ซีรีส์ 636 · ซีรีส์ 639

EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.65 Rear axle differential/axle through-drive — ซีรีส์ 636 · ซีรีส์ 639

AR35.31-S-0545S

Replace radial sealing rings on side of rear axle center assembly

04.09.2018

Model

636

Model

639

except code MA0 (E-CELL 60 kW)

Modification notes

17.04.2018

Information and picture changed

Step 5

Replace radial sealing rings on side of rear axle center assembly

Shown on left side, incorrect installation position of retaining ring (3)

1

Sealing ring

2

Rear axle gear

3

Retaining ring

S35.31-4533-06

Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Caution

Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil

Wear protective gloves, protective clothing and safety glasses.
Do not pour transmission oil into beverage bottles.

AS00.40-Z-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove

1

Remove rear axle shafts.

AR35.30-S-0620S

2

Remove sealing rings (1).


Do not damage the seat of the sealing rings (1) in the rear axle differential (2).
Leaks can occur otherwise.

Clean

3

Clean seat of sealing rings (1) in housing of rear axle differential (2).

Cold degreasing agent/cold cleaning solvent HAKU 1025-920

*BR00.45-Z-1051-04A

Check

4

Check seat of sealing rings (1) in housing of rear axle differential (2).

If damage is detected,

Replace rear axle differential(2).

Remove/install differential

AR35.31-S-0520S

5

Check installation position of left retaining ring (3).


Retaining ring (3) must not cover up bore (arrow).
Otherwise, oil may leak out through the bleed line.

If retaining ring (3) is not correctly seated,

correct installation position of retaining ring (3).

Install

6

Apply coating of oil to sealing lips of sealing rings (1).

Service Information: Hypoid gear oil for rear axle differential

SI00.40-S-0020A

Universal hypoid gear oils (specification 235.7)

BB00.40-P-0235-07A

Replace sealing rings(1).

7

Install sealing rings (1).

Drift

*140589101500

8

Install rear axle shafts.

AR35.30-S-0620S

Check

9

Check oil level in rear axle differential (2).

Rear axle - oil change

AP35.00-D-3501A

If oil level is incorrect,

Correct oil level.

Replace radial sealing rings on side of rear axle center assembly

140 589 10 15 00

Drift

Repair materials

Number

Designation

Order number

BR00.45-Z-1051-04A

Cold degreasing agent/cold cleaning solvent HAKU 1025-920

Chemische Werke Kluthe GmbH
Gottlieb-Daimler-Str. 12
69115 Heidelberg
Germany
Tel. +49 6221 5301-0
Fax +49 6221 5301-176
http://kluthe.com

เอกสารที่อ้างถึง