Remove left rear axle rpm sensor (L6/3) or right rear axle rpm sensor (L6/4).
Model 461 with disk brakes on the rear axleModel 463 (except 463.270/271) up to model year 2013with disk brakes on the rear axle
Model 461.304/334/344 with rear axle 741 (except 741.52) with code B02 (Anti-lock braking system (ABS)) Model 463.232/233/308/330/331 with rear axle 742 up to model year 2000 with code B02 (Anti-lock braking system (ABS)) Model 463.240 with rear axle 741 up to model year 2001 with code B02 (Anti-lock braking system (ABS)) Model 463.241 with rear axle 741 (except 741.524) up to model year 2001 with code B02 (Anti-lock braking system (ABS)) except code 979 (Special protection MB Guard)
Model 463.202/222/237/244/250/303/340/341 as of model year 2000 up to model year 2013 Model 463.243/245/246/247/248/249/254/309/322/323/332/333 as of model year 2000 up to model year 2010with disk brake
Model 461 with code B02 (Anti-lock braking system (ABS)) with disk brakes on the rear axleModel 463 (except 463.270/271) up to model year 2013 with code B02 (Anti-lock braking system (ABS)) with disk brakes on the rear axleDo not damage the pulse ring. Otherwise, the anti-lock braking system (ABS) will be rendered inoperative.
7
Remove sealing ring from tapered roller bearing outer race.
8
Remove seal between axle tube (5) and brake carrier plate.
Check
9
Check rear axle shaft (4) and its component parts for damage.
If problems are found,
replace damaged component parts of rear axle shaft (4) or rear axle shaft (4).
Install seal between axle tube (5) and brake carrier plate.
Replace seal between axle tube (5) and brake carrier plate.
11
Slide sealing ring onto tapered roller bearing outer race.
12
Insert rear axle shaft (4).
The marking of the direction of rotation on the rear axle shaft (4) must match the actual direction of rotation during forward travel. Otherwise, greater axle damage will occur.
Model 461 with code B02 (Anti-lock braking system (ABS)) with disk brakes on the rear axleModel 463 (except 463.270/271) up to model year 2013 with code B02 (Anti-lock braking system (ABS)) with disk brakes on the rear axleDo not damage the pulse ring. Otherwise, the anti-lock braking system (ABS) will be rendered inoperative.
Before installing, make sure that the O-ring is positioned on the support ring.
13
Hook in hand brake cable.
14
Screw in screws (2) of bearing cap (3) on axle tube (5).
Tighten screws (2) evenly in a crosswise pattern up to contact surface of bearing cap (3) and brake carrier plate on axle tube (5). Then tighten each in a crosswise pattern by half a turn until the specified tightening torque is reached. Otherwise, the bearing cap (3) will work its way loose.
Make sure that the magnetic end of the left rear axle rpm sensor (L6/3) or right rear axle rpm sensor (L6/4) is clean. Otherwise, malfunctions or failures may occur.
16.2
Measure distance between pulse ring and left rear axle rpm sensor (L6/3) or right rear axle rpm sensor (L6/4) and install.
Model 461.302/304/332/334/342/344, 463.240 with rear axle 741 (except 741.52) up to model year 2013 with code B02 (Anti-lock braking system (ABS)) Model 461.305/333/340/343 Model 461.326/335/336/365/366, 463.209/232/233/308/330/331 with rear axle 742 up to model year 2013 with code B02 (Anti-lock braking system (ABS)) Model 463.202/222/237/243/244/245/246/247/249/250/254/303/309/322/323/332/333/340/341 up to model year 2013 Model 463.241 with rear axle 741 (except 741.52) up to model year 2013 with code B02 (Anti-lock braking system (ABS)) except code 979 (Special protection MB Guard)
Model 463.232/233/308/330/331 with rear axle 742 up to model year 2000 with code B02 (Anti-lock braking system (ABS)) Model 463.240 with rear axle 741 up to model year 2001 with code B02 (Anti-lock braking system (ABS)) Model 463.241 with rear axle 741 (except 741.524) up to model year 2001 with code B02 (Anti-lock braking system (ABS)) except code 979 (Special protection MB Guard)
Model 463.202/222/237/244/250/303/340/341 as of model year 2000 up to model year 2013 Model 463.243/245/246/247/249/254/309/322/323/332/333 as of model year 2000 up to model year 2010