Remove/install camber strut

AR35.20-P-0110V

31.8.11

MODEL 171

P35.20-2128-06

Illustrated on model 171.442

2 Camber strut

3 Torque strut

4 Thrust arm

5 Slide

6 Bracket

Modification notes

2.5.07

Self-locking nut, strut rod to wheel carrier, M12

 	Remove/install
 Danger!	Risk of death caused by vehicle slipping or toppling off the lifting platform.	Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.	AS00.00-Z-0010-01A
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
 Installation	Only tighten nuts and bolts of chassis components when vehicle is in a ready-to-drive condition.
1	Lift vehicle on lifting platform.		AR00.60-P-1000V
2	Remove wheel.
	Remove/install wheels, rotate if necessary		AP40.10-P-4050V
3	Detach thrust arm (4) from wheel carrier		*BA35.20-P-1003-05A
4	Detach torque strut (3) from wheel carrier and put upwards		*BA35.20-P-1002-03A
5	Pull slide (5) upwards and unclip bracket (6)
6	Detach camber strut (2) from rear axle carrier		*BA35.20-P-1001-02A
			*129589010300
7	Detach camber strut (2) from wheel carrier		*BA35.20-P-1003-02A
			*202589001000
8	Install in the reverse order

 Torque strut

Number	Designation			Model 171


BA35.20-P-1003-05A	Self-locking nut, thrust arm to wheel carrier	Stage 1	Nm	50
		Stage 2	°	45

 Camber strut

Number	Designation			Model 171


BA35.20-P-1001-02A	Self-locking nut, camber strut to rear axle carrier.	Stage 1	Nm	50
		Stage 2	°	45
BA35.20-P-1003-02A	Self-locking nut, camber strut to wheel carrier.	Stage 1	Nm	50
		Stage 2	°	45

 Torque strut

Number	Designation			Model 171


BA35.20-P-1002-03A	Self-locking nut, torque strut to wheel carrier	M12	Nm	70
		M16	Nm	-

202 589 00 10 00

Retainer wrench

Ring wrench

129 589 01 03 00