Remove/install wheels, rotate if necessary

AP40.10-P-4050V

14.11.2018

Model

171, 172

Remove/install wheels, rotate if necessary

P40.10-3282-01

Left illustration
1 bis 5	Tightening sequence

	Right figure
	Pfeile	Interchange wheel-and-tire assemblies (vehicles without mixed tires)

P40.10-4916-01

 Danger	Risk of death caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
Topical note	Information on tires / rims		AH40.10-P-9411-01A
	Remove
1	Raise vehicle with vehicle lift
			AR00.60-P-1000V
2	Remove hubcaps	Vehicles with hubcaps
3	Unscrew wheel bolts and remove wheel-and-tire assemblies
	Check
4	Check tires for signs of damage and make sure that they are in good condition	Model 171	AP40.10-P-4051Z
		Model 172	AP40.10-P-4051EW
5	Clean and check wheel bolt connection components, then protect against corrosion		AP40.10-P-4050-01A
		 Before mounting a wheel-and-tire assembly all the operation steps listed in the linked description must be conducted carefully. The complete wheel can otherwise work its way loose from the vehicle.
		Paste, hot lubrication 1 kg, DBL 6879.20	*BR00.45-Z-1005-06A
	Install
6	Change round wheel-and-tire assemblies on front and rear axles	If necessary, subject to separate repair order and only for vehicles without mixed tires.
		 Maintain running direction of wheel-and-tire assemblies. Otherwise handling characteristics and handling comfort may be impaired and tire wear increased.
7	Mount wheel-and-tire assembly and tighten wheel bolts	 Observe the tightening sequence (1 to 5) and tightening torque.
		 Model 171Wheel bolt	*BA40.10-P-1001-01A
		 Model 172Wheel bolt	*BA40.10-P-1001-01M
8	Lower vehicle
9	Correct tire pressure of front and rear axle tires	Model 171	AP40.15-P-4061B
		Model 172	AP40.15-P-4061A
		In the event of unusual tire pressure loss:
		
		Determine and rectify cause, subject to separate repair order.
10	Mount hubcaps	Vehicles with hubcaps
		 Check for correct positioning of hubcap to valve and for correct seating. Otherwise the valve will be damaged or the hubcap will be lost.
11.1	Activate the tire pressure monitoring system	Model 172 with code 475 (Tyre pressure monitoring system)
			AR54.30-P-1000-02RAU
		 Only for wheel-and-tire assembly change, tire replacement or a change in tire pressure.
11.2	Activate tire pressure loss warning	Model 171 with code 477 (Tyre pressure loss warning system) Model 172 except code 475 (Tyre pressure monitoring system)
		Model 171 with code 477 (Tyre pressure loss warning system)	AR54.30-P-1000-02RAV
		Model 172 except code 475 (Tyre pressure monitoring system)	AR54.30-P-1000-02RAE
		 Only for wheel-and-tire assembly change, tire replacement or a change in tire pressure.

 Wheels

Number	Designation		MODEL 124, 129, 168, 170, 171, 202, 208, MODEL 210 except CODE 979
BA40.10-P-1001-01A	Wheel bolt	Nm	110

 Wheels

Number	Designation		Model 172
BA40.10-P-1001-01M	Wheel bolt	Nm	130

Repair materials

Number	Designation	Order number
BR00.45-Z-1005-06A	Paste, hot lubrication 1 kg, DBL 6879.20	A 000 989 76 51

เอกสารที่อ้างถึง