AR31.30-W-0025A | Modifying wheelbase | 2.12.97 |
MODEL 374, 375, 930, 932, 933, 934, 940, 942, 943, 944, 950, 952, 953, 954, 957, 958, 970, 972, 974, 975, 976
W31.30-0068-06
1 Separation point
| Notes on wheelbase modifications | ||
1 | Determine and mark out the parting point | Position the parting points so that no holes in the frame side member are cut. | |
2 | Expose the frame side member in the area of the parting point as much as is necessary | Remove crossmembers, equipment racks, pipes and cables. | |
3 | Remove propeller shafts | ||
4 | Support frame | ||
5 | Cut through frame side member | Only metal-removing cutting methods should be applied since changes in the carbon structure occur if flame cutters are used. | |
| General information on repairs to body | ||
6 | Welding side rails together | When lengthening the frame, the material and profile of the intermediate piece must be the same as those of the frame side member. | |
| General notes on welding | ||
7 | Reinforce vehicle frame | ||
8 | Install propeller shafts | ||
9 | Lengthen wiring harnesses | ||
10 | Reinstall parts removed in the area of the parting point |
Workshop equipment
WE58.40-Z-1001-02A | Inert gas welder |
WE58.40-Z-1002-03A | Straight grinder (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |