W41.10-1034-09
Shown on drive train with a propeller shaft center support bearing |
1 | Propeller shaft | 4 | Propeller shaft center support bearing flange connection | |
2 | Fixed forked head | 5 | Propeller shaft intermediate bearing | |
3 | Rear-axle flange connection | 6 | Transmission flange connection |
Danger ! | Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating range of the mechanism when moving components. | |
Danger ! | Risk of death caused by vehicle slipping or toppling off during lifting | Only lift vehicle at the lift support points specified by the vehicle manufacturer. | |
| Notes on removal/installation of propeller shafts | ||
| Special instructions for lifting and supporting vehicle | ||
| Remove/install | ||
1 | Secure vehicle against rolling | ||
2 | Switch off ignition | ||
3 | Lift and prop up vehicle on one side of rear axle | Only for poorly accessible threaded connections on flange connection for rear axle (3), flange connection for propeller shaft center support bearing (4), and flange connection for transmission (6). | |
Only raise far enough to enable the wheels to turn freely. | |||
4 | Secure propeller shaft (1) using tensioning straps against falling down | ||
5 | Detach propeller shaft (1) from flange connection on rear axle (3) | Bolt/nut, propeller shaft to flange connection | |
Open-end wrench socket (21_mm) | |||
Open wrench insert, (18 mm) | |||
Open-end wrench insert | |||
Open end wrench | |||
Open-end wrench | |||
Open-end wrench | |||
Open wrench | |||
Torque wrench handle | |||
6 | Detach propeller shaft (1) from flange connection of propeller shaft center support bearing (4) | Only for vehicles with propeller shaft center support bearing (5) when only one individual propeller shaft (1) of the drive train is to be removed, installed, or when the propeller shaft center support bearing (5) is to be replaced. | |
Bolt/nut, propeller shaft to flange connection | |||
Open-end wrench socket (21_mm) | |||
Open wrench insert, (18 mm) | |||
Open-end wrench insert | |||
Open end wrench | |||
Open-end wrench | |||
Open-end wrench | |||
Open wrench | |||
Torque wrench handle | |||
7 | Detach propeller shaft (1) from flange connection on transmission (6) | Bolt/nut, propeller shaft to flange connection | |
Open-end wrench socket (21_mm) | |||
Open wrench insert, (18 mm) | |||
Open-end wrench insert | |||
Open end wrench | |||
Open-end wrench | |||
Open-end wrench | |||
Open wrench | |||
Torque wrench handle | |||
8 | Detach propeller shaft center support bearing (5) from bracket | Only for vehicles with propeller shaft center support bearing (5). | |
| Propeller shaft center support bearing and bolt length modified | Only for model 930, 932, 933, 934, 950, 952, 953, 954 | |
M121.5 | |||
9 | Remove propeller shaft (1) | Remove propeller shaft (1) downward using telescopic lifter and with a help of another person. | |
10 | Install in the reverse order |
000 589 21 01 00
Open end wrench
001 589 44 21 00
Torque wrench handle
000 589 22 01 00
Open-end wrench
000 589 31 01 00
Open-end wrench socket (21_mm)
000 589 26 01 00
Open wrench
000 589 23 01 00
Open-end wrench
000 589 30 01 00
Open wrench insert, (18 mm)
000 589 29 01 00
Open-end wrench insert