S29.10-4533-08
Shown on model 470 |
1 | Electrical connector | 4 | Clutch pedal bracket | |
2 | Electrical connector | 5 | Screw | |
3 | Electric line |
Shown on model 470 |
6 | Nuts |
S29.10-4534-05
Warning | Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | Notes on carrying out repair work in the vehicle interior | ||
| Remove/install | ||
1 | Remove footwell trim on driver-side | ||
2 | Release and disconnect electrical connection (1) | ||
3 | Release and disconnect electrical connector (2) | ||
4 | Unclip electric line (3) from pedal bracket for clutch pedal (4) | ||
5 | Remove switch for clutch pedal end position at front | When replacing the clutch pedal bracket (4). | |
6 | Remove switch for clutch pedal end position at rear | When replacing the clutch pedal bracket (4). | |
7 | Remove clutch master cylinder threaded rod from clutch pedal | ||
Molykote BR 2 plus grease | |||
Assembly cleaner | |||
8 | Unscrew nuts (6) | Nut, clutch master cylinder to clutch pedal bracket | |
9 | Remove bolt (5) and remove pedal bracket for clutch pedal (4) | Screw/bolt, clutch pedal pedal bracket to firewall | |
10 | Install in the reverse order |