Remove/install oil lines of oil cooling for automatic transmission

AR27.55-S-0600P

Remove/install oil lines of oil cooling for automatic transmission

18.07.2019

Transmission

700.770 in model 470, 471 with engine 699

Modification notes

07.11.2018

Basic data reference BA27.40-N-1002-01P added.

Operation step 2

18.12.2018

Basic data reference BA27.40-N-1003-01P replaced by BA27.40-N-1004-01P.

Operation step 2

1

Oil lines

2

Bolts

3

Oil hoses

4

Transmission

5

Banjo bolts

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

 Caution

Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil

Wear protective gloves, protective clothing and safety glasses.
Do not pour transmission oil into beverage bottles.

AS00.40-Z-0001-01A

Notes on automatic transmission

AH27.19-P-0001-01NKB

 

Remove/install

1

Remove lower engine compartment paneling.

AR61.20-S-1105P

 Installation: Only install lower engine compartment paneling after leak test.

2

Detach shift cable from transmission (4).

 Bolt, holder for shift cable to transmission housing

*BA27.40-N-1002-01P

 Screw, shift cable to lever

*BA27.40-N-1004-01P

3

Remove screws (2) and detach brackets of oil lines (1).

 Screw, oil line bracket to transmission housing/oil pan bottom section/coolant pipe

*BA27.55-N-1001-02P

4

Detach oil lines (1) from oil hoses (3).

 Collect escaping transmission oil and seal connections.

 Commercially available devices/tools
Collecting pan

 Record plug

*129589009100

 Hose clamp pliers

*454589003700

5

Detach oil lines (1) from transmission (4).

 To do this, remove the banjo bolts (5). Collect escaping transmission oil and seal connections.

 Commercially available devices/tools
Collecting pan

 Banjo bolt, oil line to transmission housing

*BA27.55-N-1003-02P

 Record plug

*129589009100

6

Remove oil lines (1).

7

Install in the reverse order.



Check

8

Check oil level in transmission (4).



AP27.00-S-2701P

If the oil level is incorrect,



Correct oil level.

 Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

9

Perform engine test run and check oil lines (1) for leaktightness.

 Housing

Number

Designation

Transmission 700.770 in model 470, 471

BA27.40-N-1002-01P

Bolt, holder for shift cable to transmission housing

Nm

6

 Housing

Number

Designation

Transmission 700.770 in model 470, 471

BA27.40-N-1004-01P

Screw, shift cable to lever

Nm

15

 Oil cooling

Number

Designation

Transmission 700.770 in model 470, 471

BA27.55-N-1001-02P

Screw, oil line bracket to transmission housing/oil pan bottom section/coolant pipe

Nm

5

 Oil cooling

Number

Designation

Transmission 700.770 in model 470, 471

BA27.55-N-1003-02P

Banjo bolt, oil line to transmission housing

Nm

49