Removing/installing drive shaft with K2, front planet carrier, internal plate carrier with K1 and B3

AR27.50-D-0612WE

Removing/installing drive shaft with K2, front planet carrier, internal plate carrier with K1 and B3

18.07.2019

Transmission

722.9 in model 906

1a

Torlon ring

12

Front planet carrier

15

B3 multidisk brake

1w

Torque converter housing

13

Inner plate carrier

16

B1 multidisk brake

11

Drive shaft

14

K1 multidisk clutch

 

Remove/install

Notes on automatic transmission

AH27.19-P-0001-01NKB

1

Remove output unit

AR27.50-D-0611WE

 The output unit consists of the multidisk clutch K3, rear hollow shaft, rear planet carrier, output shaft and rear ring gear.

2

Remove drive shaft (11)

 Replace parts of drive shaft (11) as per findings,

refer to:



Disassemble/assemble multiplate clutch K2.

AR27.51-D-0820WE

3

Remove Torlon rings (1a) from drive shaft (11)

 Installation: Replace the Torlon rings (1a).

 Sleeve

*722589011400

4

Remove cylinder flange along with front planet carrier (12)

5

Remove internal plate carrier (13)

6

Remove multidisk brake B3 (15)

 Installation: Position bores (arrows) of multidisk brake B3 (15) and multidisk brake B1 (16) exactly on top of each other.

If necessary:



Disassemble/assemble multi-disk brake B3 (15)

AR27.50-D-0890WE

7

Remove multidisk clutch K1 (14)

 If necessary, replace parts of multiplate clutch K1 (14),

refer to:



Disassemble/assemble multiplate clutch K1 (14).

AR27.51-D-0800WE

8

Install in the reverse order