AR26.60-W-0020A | Remove/install oil reservoir | 3.11.10 |
TRANSMISSION 712.611 /62, 715.050 in MODELS 970, 972, 976 with CODE (GE1) Automatic gear control (AGS)
TRANSMISSION 712.63, 715.060 in MODEL 970, 972, 974, 976 with CODE (GE1) Automatic gear control (AGS)
TRANSMISSION 712.63 in MODEL 950.5, 952.5, 954.5 with CODE (GE1) Automatic gear control (AGS)
TRANSMISSION 715.060 in MODEL 950.5 /6, 952.5, 954.5 with CODE (GE1) Automatic gear control (AGS)
W26.60-1152-06
Shown on transmission 715.050
1 Bolt (top)
2 Bolt (bottom)
3 Securing clamp
| Remove/install | ||
1 | Switch off ignition | ||
Danger! | Risk of injury to hands or eyes when working on hydraulic pressure reservoir systems caused by hydraulic fluid to specification 345.0 spraying out under pressure | Depressurize hydraulic pressure reservoir system before commencing work on system. Wear protective gloves and safety glasses. | |
2 | Depressurize pressure reservoir for automatic gear control (AGS) | Depressurization should preferably be carried out using STAR DIAGNOSIS as the system can be filled with a pressure of up to 90 bar and the manual depressurization represents an increased source of danger. | |
| |||
| Notes on hydraulic fluid as per specification 345.0 | ||
3 | Remove pressure reservoir | ||
4 | Detach securing clamps (3) on feed line and return line | ||
5 | Unscrew bolts (1, 2) on oil container | Bolts (1) at top of oil container. | |
Bolt (2) at bottom of oil container. | |||
6 | Remove oil container from transmission housing | Withdraw feed and return lines from oil container. Collect any escaping hydraulic fluid in suitable container and dispose of in line with applicable regulations. | |
7 | Install in the reverse order | ||
8 | Fill oil container with hydraulic fluid | Only sheet 345.0 hydraulic fluid may be used as otherwise the hydraulic system may fail. | |
| Hydraulic fluids (Specification 345.0) | ||
9 | Check and correct hydraulic oil level |
Automatic gear control (AGS)