Disassemble and assemble main shaft

AR26.50-D-0420F

29.10.15

Transmission

711.651 in model 906.1/2/6/7 with engine 646.984/985/986/989/990

D26.50-1225-09

1	Synchronizer unit of reverse gear	10	Cone ring	19	Main shaft
2	Synchronizer ring	11	Synchronizer ring	20	6th gear needle roller bearing
3	Reverse gear idler gear	12	Retaining ring	21	6th gear idler gear
4	Reverse gear needle roller bearing	13	1st/2nd gear synchronizer unit	22	Clutch body
5	Bearing bushing of reverse gear	14	Synchronizer ring	23	Synchronizer ring
6	Thrust plate	15	Cone ring	24	5th/6th gear synchronizer unit
7	1st gear idler gear	16	Friction ring	25	Synchronizer ring
8	1st gear needle roller bearing	17	2nd gear idler gear	26	Clutch body
9	Friction ring	18	2nd gear needle roller bearing	27	Retaining ring

	Remove
1	Remove the transmission		AR26.10-D-0020G
2	Attach transmission to assembly stand		AR26.10-D-0036A
3	Disassemble transmission housing		AR26.40-D-2002D
4	Remove main shaft (19)		AR26.50-D-0002A
	Disassemble
5	Disassemble main shaft (19)		AR26.50-D-0420-14G
		 Support fixture	*711589014000
		 Puller	*000589653300
		 Gripper	*000589873300
	Check
6	Clean the components
7	Check components	In event of damage and/or wear
		
		Replace corresponding component.
	Assemble
8	Assemble main shaft (19)		AR26.50-D-0420-15G
		 Drift	*198589033900
		 Set of assembly clamps	*711589013700
		 Drift	*711589071500
		 Sleeve	*716589023300
	Install
9	Install main shaft (19).		AR26.50-D-0002A
10	Attach gear set with rear section of transmission housing to assembly stand		AR26.10-D-0036A
11	Assemble transmission housing		AR26.40-D-2002D
12	Detach transmission from assembly stand
13	Install transmission		AR26.10-D-0020G