Fasten transmission on assembly stand

AR26.10-D-0036A

17.6.11

TRANSMISSION 711.651 in MODEL 906 with ENGINE 271.951, 646.984 /985 /986 /989 /990

TRANSMISSION 711.660 in MODEL 906 with ENGINE 642.992, 646.985 /986 /989 /990

TRANSMISSION 711.670 in MODEL 204 with ENGINE 642, 651

TRANSMISSION 711.680 in MODEL 906

TRANSMISSION 711.685 in MODEL 906

TRANSMISSION 711.670 in MODEL 207 with ENGINE 651

TRANSMISSION 711.680 in MODEL 900 with ENGINE 651.955

D26.50-1252-09

1  Assembly stand

2 Support

4 Locking claw

3 Screw

	Attach, remove
1	Remove transmission	Model 204 with transmission 711.67	AR26.10-P-0020SA
		Model 207 with transmission 711.67	AR26.10-P-0020CWA
		Model 900 with transmission 711.680 Model 906 with transmission 711.680/685	AR26.10-D-0020H
		Model 906 with transmission 711.65 and engine 271	AR26.10-D-0020NG
		Model 906 with transmission 711.65 and engine 646 or with transmission 711.66 and engine 642, 646	AR26.10-D-0020G
2	Check locking claw (4), replace if necessary	Transmission 711.65/66/67
		 The transmission flange thickness differs depending on the transmission model (14 mm or 19 mm). The locking claws (4) are marked with the relevant flange thicknesses.
		 Fixture	*711589004000
3	Install mount (2) on the assembly stand (1) and position mount (2) horizontal with the bearing pins (arrows) upward	 Assembly stand	*116589065900
		 Mount (transmission 711.65/66/67)	*711589004000
		 Mount (transmission 711.68)	*711589024000
4	Attach transmission to bearing pins (arrows) and secure with spring cotters
5	Attach locking claw (4) to transmission housing and secure with bolt (3)
6	Swivel mount (2) into the corresponding operation position
7	Detach in the reverse order

711 589 00 40 00

Support

Assembly stand

116 589 06 59 00

711 589 02 40 00