1 | Clamp |
2 | Screw |
3 | Central clutch release bearing |
P26.40-2046-05
3 | Central clutch release bearing |
4 | Ball head |
P26.40-2115-05
| Remove/install | ||
1 | Remove transmission |
| |
Transmission 716.6 | |||
| Clean | ||
2 | Clean area around line connection of central clutch release bearing (3) | Vehicles with single-plate clutch | |
Assembly cleaner | |||
3 | Lever clamp (1) out of line connection | Vehicles with single-plate clutch | |
4.1 | Remove bolts (2) and remove central clutch release bearing (3) | Vehicles with single-plate clutch | |
Installation: Replace the O-ring of the line connection. | |||
Transmission 716.6Bolt, central release bearing to clutch housing | |||
TRANSMISSION 711.6Bolt, central clutch release bearing/slave cylinder to transmission housing | |||
4.2 | Detach central clutch release bearing (3) | Vehicles with double-plate clutch | |
Installation: Apply light coating of grease to ball head (4) on transmission before installation of the central clutch release bearing (3). | |||
Long-life grease | |||
5 | Check central clutch operator (3) | Replace if necessary. | |
6 | Install in the reverse order |