S25.20-4516-09
1 | Hydraulic line | 3 | Clutch master cylinder | 5 | Mounting clip | ||
2 | Clutch pedal bracket | 4 | Central clutch release bearing | 6 | Carrier |
Caution | Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | |
Topical note | Brake fluid notes | ||
| Remove/install | ||
1 | Release coolant expansion reservoir and swivel out of working area. | ||
Hoses are not removed. | |||
2 | Drain brake fluid from brake fluid expansion reservoir. | Commercially available devices/tools | |
3 | Unfasten pedal bracket for clutch pedal (2). | ||
The hydraulic line (1) must be accessible. | |||
4 | Remove hydraulic line (1) from clutch master cylinder (3). | To do so, open safety clips and detach hydraulic line (1) from clutch master cylinder (3). Collect escaping brake fluid. Plug openings. | |
Record plug | |||
5 | Disconnect hydraulic line (1) from central clutch release bearing (4). | To do so, remove safety clip. Collect escaping brake fluid. Plug openings. | |
Record plug | |||
6 | Release hydraulic line (1) from wheel arch. | To do so, retaining clip (5) from wheel arch. | |
Installation: Check retaining clip (5), and, if necessary, replace. | |||
7 | Remove hydraulic line (1). | To do so, route hydraulic line (1) through carrier (6). | |
Installation: Ensure correct installation position. | |||
8 | Install in the reverse order. | ||
9 | Bleed clutch operating system. | ||
| Check | ||
10 | Check clutch operation for leak tightness. | Visual inspection only. |
129 589 00 91 00
Record plug