P25.20-A001-08
Shown on model 177 |
1 | Expansion reservoir | 4 | Cap | |
2 | Cap | 5 | Bleed screw | |
3 | Clutch slave cylinder |
Caution | Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | |
Topical note | Brake fluid notes | ||
| Remove/install | ||
1 | Mark height of fill level of brake fluid on expansion reservoir (1). | Installation: Correct the fill level of the brake fluid in the expansion reservoir (1). | |
2 | Unscrew cap (2) from expansion reservoir (1). | ||
3 | Connect filler/bleeder unit to expansion reservoir (1). | ||
| 000 588 01 82 00 Filling unit | ||
Note operating instructions for filler/bleeder unit. | |||
4 | Remove engine air intake duct upstream of air filter housing together with air filter housing. |
| |
Model 118, 177, 247 with engine 608 with transmission 711.6 | |||
Model 118, 177, 247 with engine 282 with transmission 711.6 | |||
5 | Remove cover (4) from clutch slave cylinder (3). | ||
6 | Slide hose onto vent screw (5) on clutch slave cylinder (3). | ||
Bleeding | |||
7 | Open vent screw (5) and let brake fluid drain off. | ||
Brake fluid must emerge clean and free of bubbles. | |||
Bleed screw to central clutch operator | |||
8 | Install in the reverse order. | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
9 | Perform engine test run, check clutch operation for proper operation and check for leak tightness. |