Shown on model 177 |
1 | Additional radiator |
2 | Coolant hoses |
3 | Supporting frame |
4 | Coolant line |
5 | Bracket |
P20.20-A102-05
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Warning | Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
Topical note | Notes on coolant | ||
Notes on coolant level | |||
| Remove/install | ||
1 | Drain off coolant. | ||
2 | Unclip coolant line (4) from the brackets (5). | ||
3 | Unclip and remove the supporting frame (3). | Secure additional cooler (1) against falling down. | |
4 | Remove coolant hoses (2) from the additional cooler (1). | ||
5 | Remove additional cooler (1) downwards. | ||
6 | Seal openings using protective cover. | Set of protective covers | |
7 | Check additional cooler (1) for damage. | If there are problems, | |
| |||
Replace additional cooler (1). | |||
8 | Install in the reverse order. |
001 589 01 91 00
Set of protective covers