S15.40-A004-79
1 | Alternator | 3 | Electrical line B+ | 4 | Nut | ||
2 | Cap |
S15.40-A005-78
1 | Alternator | 5 | Screw | 6 | Electrical connection D+ |
Topical note | Notes on self-locking nuts and bolts | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Disconnect ground line from battery. | ||
2 | Remove poly-V-belt guide pulley. | ||
3 | Remove mixer housing. | MODEL 447 with CODE HH4 (THERMOTRONIC automatic air conditioning) or CODE HH9 (Semi-automatically controlled air conditioning, TEMPMATIC) | |
4 | Pull off the cap (2) and remove the nut (4). | Nut, circuit B+ to alternator | |
5 | Remove electrical line B+ (3) from the alternator (1) and place to one side. | ||
6 | Remove bolts (5). | Screw, alternator to major assembly carrier/oil filter | |
7 | Remove the alternator (1). | ||
8 | Pull the alternator (1) forward until electrical connection D+ (6) can be accessed. | ||
9 | Disconnect electrical connection D+ (6). | ||
10 | Remove the alternator (1). | Installation: If necessary, push back the sleeves on the rear attachments of the alternator (1). | |
11 | Install in the reverse order. | ||
| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
12 | Perform an engine test run and check the alternator (1) for proper operation. |