ซีรีส์
th
ar1322p1202mrd
Remove/install poly-V belt
ประเภท ar · หัวข้อ 13.22 · เวอร์ชัน 0103 · 2017-07-14
ใช้กับ: Engine 274.9 in model 213 (except 213.050) Engine 274.9 in model 238
ไม่มีใน “th” แสดงเป็น อังกฤษ
ตำแหน่ง
กลุ่มฟังก์ชัน 1 Engine › 13 Air compressor, belt drives › 13.22 Single-belt drive — ซีรีส์ 213 (รุ่น 004, 005, 008, 011, 012, 013, 016, 019, 020, 021, 022, 023, 033, 034, 040, 042, 043, 045, 048, 049, 053, 054, 059, 061, 064, 066, 068, 071, 073, 076, 077, 078, 080, 083, 084, 085, 086, 087, 088, 089, 104, 122, 131, 140, 142, 143, 148, 153, 155, 163, 177, 178, 180, 183, 186, 187, 204, 205, 208, 211, 212, 213, 216, 217, 219, 220, 222, 223, 227, 233, 234, 237, 242, 243, 245, 253, 259, 260, 261, 264, 266, 268, 271, 277, 278, 279, 280, 283, 287, 288, 289) · ซีรีส์ 238
EinPAS 15 Engine › 15.18 Belt drive › 15.18.30 Belt/belt pulley/clamping device/guide pulley — ซีรีส์ 213 (รุ่น 004, 005, 008, 011, 012, 013, 016, 019, 020, 021, 022, 023, 033, 034, 040, 042, 043, 045, 048, 049, 053, 054, 059, 061, 064, 066, 068, 071, 073, 076, 077, 078, 080, 083, 084, 085, 086, 087, 088, 089, 104, 122, 131, 140, 142, 143, 148, 153, 155, 163, 177, 178, 180, 183, 186, 187, 204, 205, 208, 211, 212, 213, 216, 217, 219, 220, 222, 223, 227, 233, 234, 237, 242, 243, 245, 253, 259, 260, 261, 264, 266, 268, 271, 277, 278, 279, 280, 283, 287, 288, 289) · ซีรีส์ 238
ใช้กับเครื่องยนต์/เกียร์ด้วย: 274 9**
AR13.22-P-1202MRD
Remove/install poly-V belt
24.05.2017
Engine
274.9 in model 213 (except 213.050)
Engine
274.9 in model 238
1
Poly-V-belt
3
Multi-tooth pin
4
Tensioning device
Warning
Risk of injury . Skin or eye injuries may result when handling hot or glowing objects.
Wear protective gloves, protective clothing and safety glasses, if necessary.
AS00.00-Z-0002-01A
Warning
Risk of injury . Moving parts can pinch, crush or, in extreme cases even sever extremities.
No parts of the body or limbs should be within the operating area of mechanical components when moving components.
AS00.00-Z-0009-01A
Remove
1
Remove upper engine cover
2
Remove engine air intake duct upstream of air filter
3
Turn clamping device (4) on multi-tooth pin (3) counterclockwise and lock with a suitable drift
4
Remove the poly-V belt (1)
Install
5
Check the poly-V belt (1) for damage and replace if necessary
AP13.22-P-1351-01A
6
Check clamping device (4) for damage and replace if necessary
AR13.25-P-3220MRD
7
Check guide pulley for damage and replace if necessary
Engine 274.9 in model 213.048/049/148
Bolt, guide pulley to alternator
*BA13.25-P-1004-01Z
8
Check vibration damper for damage and replace if necessary
AR03.30-P-1800MRD
9
Check belt pulley for alternator for damage and replace if necessary
AR15.40-P-5710MRD
10
Check belt pulley for A/C compressor for damage and replace if necessary
AR83.55-P-5310LWK
Engine 274.9 in model 213 (except 213.050)
AR83.55-P-5310LW
11
Fit on poly-V belt (1)
Routing diagram for poly-V belt
AR13.22-P-3902-02MRD
12
Pull out drift (1) and tension poly-V belt with clamping device (4)
13
Push back clamping device (4) onto multi-tooth pin (3) clockwise using a torque
Pretension for poly-V belts on multi-tooth clamping device
*BA13.25-P-1005-01Z
Warning
Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.
Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.
AS00.00-Z-0005-01A
14
Perform an engine test run and check engine for proper function
15
Install engine air intake duct upstream of air filter
16
Install upper engine cover
Number
Designation
Engine 274
BA13.25-P-1004-01Z
Bolt, guide pulley to alternator
Nm
20
Number
Designation
Engine 274
BA13.25-P-1005-01Z
Pretension for poly-V belts on multi-tooth clamping device
Nm
55
เอกสารที่อ้างถึง
