1 | Guide pulley |
2 | Guide pulley |
3 | Belt pulley |
S13.20-0002-06
Danger ! | Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating range of the mechanism when moving components. | |
| Remove | ||
1 | Remove fan | ||
2 | Loosen screw/bolts for belt pulley (3) | Only when removing the guide pulley (2). | |
Unfasten screw/bolt by a few turns. | |||
3 | Remove poly-V belt for fan | Only when removing the guide pulley (2). | |
4 | Remove belt pulley (3) | Only when removing the guide pulley (2). | |
To do this, unscrew screw/bolts completely. | |||
5 | Remove poly-V belt | ||
6 | Remove cap from respective guide pulley (1, 2) | ||
7 | Remove respective guide pulley (1, 2) | ||
| Check | ||
8 | Check respective guide pulley (1, 2) for wear and damage | Replace respective guide pulley (1, 2) for the respective findings. | |
| Install | ||
9 | Install respective guide pulley (1, 2) | Bolt, guide pulley to timing case cover | |
10 | Install cap from respective guide pulley (1, 2) | ||
11 | Install poly-V belt | ||
12 | Install belt pulley (3) | Only if the guide pulley (2) was removed. | |
Counterhold belt pulley (3) when tightening of the screw/bolts. | |||
Bolt, poly-V belt pulley of fan to hub | |||
13 | Install poly-V belt for fan | Only if the guide pulley (2) was removed. | |
14 | Install fan |