Remove/install hot film mass air flow sensor

AR07.07-P-1455MFE

Remove/install hot film mass air flow sensor

17.04.2019

Engine

608 in model 118, 177, 247

Shown on model 177

1

Bolts

B2/5

Hot film mass air flow sensor

 

Remove/install

1

Remove upper engine cover.



AP01.10-P-2405-01B

 Installation: Only install upper engine cover after the leak test.

2

Remove air filter housing.

AR09.10-P-1150MFE

3

Unscrew screw/bolts (1).

4

Remove hot film mass air flow sensor (B2/5).

 Installation: Replace seal.
Observe installation position of the hot film mass air flow sensor (B2/5).
The arrow on the housing marks the flow direction of the intake air.

5

Install in the reverse order.