ar0707p1455mfe

Remove/install hot film mass air flow sensor

Type ar · topic 07.07 · version 0101 · 2019-04-19

Applies to: Engine 608 in model 118, 177, 247

Where it sits

Function group 1 Engine › 07 Mixture formation › 07.07 Air volume guage, air mass guage — Series 118 · Series 177 · Series 247

EinPAS 15 Engine › 15.45 Engine management › 15.45.12 Sensor/switch/wiring harness — Series 118 · Series 177 · Series 247

Also applies to engines/gearboxes: 608 ***

AR07.07-P-1455MFE

Remove/install hot film mass air flow sensor

17.04.2019

Engine

608 in model 118, 177, 247

Remove/install hot film mass air flow sensor

P07.07-2088-09

Shown on model 177

1

Bolts

B2/5

Hot film mass air flow sensor

Remove/install

1

Remove upper engine cover.

AP01.10-P-2405-01B

Installation: Only install upper engine cover after the leak test.

2

Remove air filter housing.

AR09.10-P-1150MFE

3

Unscrew screw/bolts (1).

4

Remove hot film mass air flow sensor (B2/5).

Installation: Replace seal.
Observe installation position of the hot film mass air flow sensor (B2/5).
The arrow on the housing marks the flow direction of the intake air.

5

Install in the reverse order.

Referenced documents