| Removing/installing | ||
1 | Remove camshaft | ||
2 | Remove camshaft bearings | After pulling out the camshaft bearings, thoroughly clean the bearing seats. | |
| |||
3 | Gage camshaft bearings | First use the micrometer to set the internal measuring instrument with the dial gage mounted, to the dimension of the camshaft bearings. | |
| |||
| |||
| |||
Camshaft bearing inner diameter | |||
Camshaft bearing width | |||
4 | Install camshaft bearings | ||
5 | Install camshaft |
Inspection and setting data of camshaft
Number | Designation | Engine | Engine | ||
BE05.20-N-1002-04L | Camshaft basic bearing inner diameter at all bearing points | Standard | mm | 70.00...70.03 | 70.00...70.03 |
Deviation 0.1 | mm | 69.90...69.93 | 69.90...69.93 | ||
Deviation 0.25 | mm | 69.75...69.78 | 69.75...69.78 | ||
Deviation 0.5 | mm | 69.50...69.53 | 69.50...69.53 | ||
BE05.20-N-1003-04L | Camshaft bearing width | Bearing point 1 | mm | 35.98...36.02 | 35.98...36.02 |
Bearing points 2 to 5 | mm | - | 27.8...28.2 | ||
Bearing points 2 to 6 | mm | 27.8...28.2 | - | ||
Bearing point 6 | mm | - | 38.7...39 | ||
Bearing point 7 | mm | 38.7...39 | - | ||
403 589 02 33 00
Removal and insertion device
Dial indicator
001 589 53 21 00
Commercially available tools