Removal and insertion device
403 589 02 33 00
T05.20-0011-01
1 Mount camshaft bearing (1) on the bearing sleeve (2) and lock in place.
- Oil outside of camshaft bearing first of all.
- In the case of camshaft bearings 1 - 6, the second oil drilling (1) must be positioned at the top on the side.
- In the case of camshaft bearing 7 (collar bearing) the bottom oil drilling must be pointing to the right opposite the vertical center line.
T05.20-0012-01
2 Position bearing sleeve (arrow) with camshaft bearings 1 - 6 against the relevant bearing bore, from the vibration damper side.
- Additionally insert a locating ring into bearing bore 7 (collar bearing).
- Fit on bearing sleeve with bearing 7 (collar bearing) the opposite way around.
- Press in only one camshaft bearing during each operation.
T05.20-0008-01
3 Screw star handle hub (1) onto the spindle tube (2) and insert spindle tube into the centering tube (3).
4 Turn spindle tube radially until the locking pin (4) of the centering tube locks in place.
Blocking the bearing sleeve relevant to the spindle tube at the same time aligns the oil drilling of the camshaft bearing relative to the crankcase.
T05.20-0013-01
5 Insert locking piece (1) into the groove (2) ahead of the bearing sleeve (3).
In the case of camshaft bearing 7 (collar bearing) insert locking piece behind bearing sleeve.
T05.20-0014-01
6 Connect star handle hub (1) and centering tube 82) with the half shell (3).
T05.20-0010-01
7 Screw star handle into the hub and press in camshaft bearing by turning to the left.
- Press in only one camshaft bearing during each operation.
- Inspect clear passage of oil drillings of camshaft bearings.
Camshaft bearing 7 (collar bearing)
- In the case of camshaft bearing 7 (collar bearing), detach half shell and turn star handle to the right when pressing in bearing.
T05.20-0015-01
8 Take out locking piece (1) at the bearing sleeve (2).
9 Pull spindle tube complete with hub and star handle out of the crankcase.
10 Take centering tube and bearing flange off the crankcase..