ENGINE | 900.9 in MODEL 375.1, 970, 972, 975, 976 |
ENGINE | 902.9 in MODEL 375.1, 970, 972, 974, 975, 976 |
ENGINE | 902.9 in MODEL 375.3, 950.5/6, 952.5/6, 953.6, 954.5 |
ENGINE | 902.9 in MODEL 957 |
without CODE MS8 (Natural gas engine) | |
ENGINE | 924.9 in MODEL 958.0, 970, 972, 974, 975, 976 |
ENGINE | 925.9 in MODEL 970, 972, 974 |
ENGINE | 926.9 in MODEL 950.5/6, 952.5/6, 953.6, 954.5, 957, 958.2 |
ENGINE | 926.9 in MODEL 958.0 |
| Check | ||
1 | Remove oil filter element and check slats of oil filter element from outside for metal abrasion and swollen condition | Only in case of extreme wear or damage to the engine components. | |
| Engine 900.9, 902.9, 925.9; engine 924.9 in model 970, 972, 974, 975, 976; engine 926.9 in model 950, 952, 953, 954, 957 | ||
Engine 924.9, 926.9 in model 958 | |||
2 | Replace oil-water heat exchanger | Only if there is metal abrasion on the oil filter element lamella or in the engine oil circuit. | |
Engine 900.9, 924.9 | |||
Engine 902.9, 925.9, 926.9 except in model 957 | |||
Engines 902.9, 926.9 in model 957 | |||
3 | Remove oil spray nozzles, check them and replace them if necessary | Only if the pistons were damaged. | |
4 | Remove oil pump, disassemble and check for wear and damage by means of a visual inspection | Only when an increased amount of metal abrasion is found on oil filter element lamella. | |
MODELS 375, 950, 952, 953, 954, 958, 970, 972, 974, 975, 976 | |||
Model 957 | |||
5 | Replace engine oil and oil filter element | Only in case of metal abrasion or swollen oil filter element (coolant in engine oil circuit). | |
| Engine 900.9, 902.9, 925.9; engine 924.9 in model 970, 972, 974, 975, 976; engine 926.9 in model 950, 952, 953, 954, 957 | ||
Engine 924.9, 926.9 in model 958 |