Model | 447 |
with code EA2 (COMAND Online with 6-disc DVD changer) | |
Model | 447 |
with code EJ9 (COMAND Online) | |
Model | 448 |
with code EA2 (COMAND Online with 6-disc DVD changer) | |
Model | 470, 471 |
with code EJ9 (COMAND Online) | |
Model | 907, 910 |
with code E1E (Navigation) | |
with code E3M (MBUX multimedia system with 7-inch touch screen) | |
Model | 907, 910 |
with code E4M (MBUX multimedia system with 10.25-inch touchscreen) | |
Model | 907, 910 |
with code EJ9 (COMAND Online) |
Danger | Risk of fire/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning caused by swallowing battery electrolyte or absorption of lead through the skin or orifices. Risk of death due to voltage U >= 30 V AC and U >= 60 V DC. | No fires, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers. | |
Prepare update | |||
1 | Check whether the customer is entitled to a map update free of charge. | ||
| Service Information: Free map updates for COMAND | With code EX9 (Free-of-charge map updates for 3 years) | |
2 | Activation code for map update is available in Vehicle Documentation (VeDoc). | ||
3 | Connect charger to jump-start connection point. | ||
4 | Switch electronic ignition lock control unit (EZS) to position "1" (circuit 15R). | ||
5 | Switch on COMAND operating, display and controller unit (A40/3). | ||
6 | Connect Blu-ray player of vehicle diagnosis system to front USB ports of COMAND controller unit. | Alternatively, connect the master USB stick to the front USB connections of the COMAND control unit. To do so, use the Media Interface adapter cable (A177 820 29 01). | |
If a Blu-ray option is not available (update using Blu-ray is not available in every market), | |||
| |||
Carry out update using the master DVD or USB stick. | |||
Update | |||
7.1 | Insert masterBluray disc into external Blu-ray player of XENTRY Kit and update map data. | When updating using the master Blu-ray disc | |
The progress bar indicates how much has been completed. | |||
7.2 | Start menu for master USB flash drive and update map data. | With update using master USB stick | |
The update process can take a while to complete. | |||
8.1 | Remove master Bluray disc from Blu-ray player and disconnect front USB ports. | After updating using the master Blu-ray disc | |
8.2 | Disconnect USB flash drive from front USB ports. | After updating using master USB stick | |
9 | Switch off COMAND operating, display and controller unit (A40/3). | ||
10 | Switch electronic ignition lock control unit (EZS) to position "0" (circuit 15R). | ||
11 | Disconnect charger. |