1 | Electrical connector |
2 | Clamps |
3 | Fuel filter |
4 | Screw |
G47.20-3187-76
Danger | Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel. | No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only. | |
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Remove charge air pipe downstream of exhaust gas turbocharger. | ||
| |||
Installation: Only install upper engine cover after the leak test. | |||
2 | Disconnect electrical connector (1). | With CODE KL5 (Fuel filter with water separator) | |
3 | Open clamps (2). | Installation: Replace clamps (2). | |
Pliers for click clamps | |||
4 | Remove fuel hoses from fuel filter (3). | Catch collect escaping fuel, close off connections. | |
Record plug | |||
If the fuel hoses are porous or damaged, | |||
| |||
replace fuel hoses. | |||
5 | Loosen screw (4). | Bolt, hose clamp cage to fuel filter | |
6 | Remove fuel filter (3) upwards. | ||
7 | Install in the reverse order. | ||
8 | Switch ignition on and off several times in succession. | | |
9 | Check for leak tightness when engine is running. | Perform a visual inspection only and then switch off the engine. | |
10 | Install upper engine cover. | ||
11 | Confirm conducted operations in maintenance booklet or in Digital Service Booklet (DSB). |
129 589 00 91 00
Record plug
171 589 00 37 00
Pliers for click clamps