Check and correct power steering oil level

AP46.00-T-4611A

26.10.98

MODEL NMB613.355 /358 /388 /455 /485 with STEERING 765.860

MODEL NMB671.000 /005 /010 /312 /322 /327 /015 /020 /021 /030 /042 /332 /333 with STEERING 765.866

MODEL NMB613.364 /365
with steering ZF 8098 for O560

MODEL NMB613.358 /388 with STEERING 766.376

T46.00-0012-01

Oil reservoir with opaque housing

1 Dipstick

Oil reservoir with transparent housing

T46.00-0011-01

Danger!	Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns when working in engine during starting procedure	Secure vehicle to prevent it from moving. Wear closed and snug-fitting work clothes. Do not grasp hot or rotating parts.	AS00.00-Z-0005-01A
1	Start engine
	Check
2.1	Check oil level in oil reservoir with opaque housing	 To do this, pull out the oil dipstick (1), wipe with a lint free rag, insert fully into the oil reservoir with opaque housing and read off the oil level by pulling out the oil dipstick (1) again. The oil level of the power steering is correct when the oil is between the lower and upper marking on the oil dipstick (1).
2.2	Check the oil level in the oil reservoir with transparent housing	 The oil level in the power steering is correct when the oil is between the minimum mark and maximum mark in the oil reservoir with transparent housing.
3	Correct the oil level if necessary	 If the oil level is too low, determine the cause and eliminate against a separate order. Use steering gear oil in accordance with the Specifications for Operating Fluids.
	Steering gear oils (ATF)	Sheet 236.3	BB00.40-P-0236-03A
4	Turn off engine
5	Check oil level	 Once the engine is switched off the oil level in the oil reservoir may rise by 1 to 2 cm. The steering system should be bled if the oil level rises by more than 2 cm.