ap4210p4258am

Inspect condition of brake disks

ประเภท ap · หัวข้อ 42.10 · เวอร์ชัน 0102 · 2013-05-09

ใช้กับ: MODEL 129, 140, 170, 202, 208, 210

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 2 Chassis › 42 Brakes - hydraulic and mechanical systems › 42.10 Service brake — ซีรีส์ 129 · ซีรีส์ 140 · ซีรีส์ 170 · ซีรีส์ 202 · ซีรีส์ 208 · ซีรีส์ 210

EinPAS 21 Brakes/vacuum system/compressed-air system › 21.15 Service brake/vacuum system › 21.15.40 Service brake, front — ซีรีส์ 129 · ซีรีส์ 140 · ซีรีส์ 170 · ซีรีส์ 202 · ซีรีส์ 208 · ซีรีส์ 210

EinPAS 21 Brakes/vacuum system/compressed-air system › 21.15 Service brake/vacuum system › 21.15.42 Service brake, rear — ซีรีส์ 129 · ซีรีส์ 140 · ซีรีส์ 170 · ซีรีส์ 202 · ซีรีส์ 208 · ซีรีส์ 210

AP42.10-P-4258AM

Inspect condition of brake disks

7.5.13

MODEL

129, 140, 170, 202, 208, 210

Modification notes

5.4.13	Bremsscheibendicke	TYP 170.435/444/445/447/449	BE42.10-P-1001-08B
5.4.13	Bremsscheibendicke	TYP 202.024/025/026/029/082/085/086/087/088/089/128/188, TYP 202.028 ab 01.09.95 außer CODE 957	BE42.10-P-1001-08B
5.4.13	Bremsscheibendicke	TYP 208.335/344/345/347/348/435	BE42.10-P-1001-08B
5.4.13	Bremsscheibendicke	TYP 210.003/004/006/007/010/017/020/035/037/048/062/206/210/215/217/235/237/248/262, TYP 210.061/261 bis 01.07.99 mit CODE 472,T YP 210.061/261 außer CODE 472	BE42.10-P-1001-08B

Inspect condition of brake disks

010	Vernier caliper
1	Brake disk
2	Crack length

P42.10-2612-11

 	Remove/install
 Danger !	Risk of death caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by vehicle manufacturer.	AS00.00-Z-0010-01A
 Danger !	Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.	Wear protective gloves, protective clothing and safety glasses, if necessary.	AS00.00-Z-0002-01A
	Notes on repairs to brake system		AH42.00-P-0003-01A
1	Remove wheels		AP40.10-P-4050Z
	Check
2	Check brake disks (1) at front and rear axle	 Inspect for scores and cracks. Hairline cracks can occur due to high stress.
		 Ventilated, brake disks (1) with perforations and without perforations do not have to be replaced if the crack length (2) is a maximum of 25 mm.
		With perforated brake disks (1) measure crack length (2) inclusive hole diameter. For cracks and scores which have split open and are deeper than 0.5 mm:
		
		Replace brake disks.
			AR42.10-P-0220A
	Measure
3	Measure thickness of brake disks on front and rear axles using caliper gauge (010)	 Observe recommended limit dimensions, so that the wear limit is not dropped below before the next brake pad change,
		 Caliper gauge	*140589001900
		If necessary:
		
		Replace brake disks.
			AR42.10-P-0220A
		Test values for front axle	*BE42.10-P-1001-08B
		Test values for rear axle	*BE42.10-P-1001-09B
4	Install in the reverse order

Check values for front axle brake disks

Number	Designation			MODEL 129.058/063 with CODE 472	MODEL 129.058/063 except CODE 472, MODEL 129.060/061/066
BE42.10-P-1001-08B	Brake disk thickness	New	mm	30	28
		Wear limit	mm	28	25,4
		Wear limit for maintenance service	mm	28,5	26

Check values for front axle brake disks

Number	Designation			MODEL 129.059/064 except CODE 472, MODEL 129.067 with CODE 494, with CODE 498, with CODE 625	MODEL 129.059/064 with CODE 472
BE42.10-P-1001-08B	Brake disk thickness	New	mm	28	32
		Wear limit	mm	25,4	30,4
		Wear limit for maintenance service	mm	26	31

Check values for front axle brake disks

Number	Designation			MODEL 129.067 except CODE 494, except CODE 498, except CODE 625, MODEL 129.076 up to 31.03.98	MODEL 129.068, MODEL 129.076 as of 01.04.98
BE42.10-P-1001-08B	Brake disk thickness	New	mm	30	32
		Wear limit	mm	28	30,4
		Wear limit for maintenance service	mm	28,5	31

Check values for front axle brake disks

Number	Designation			MODEL 140.134 up to 31.12.91	MODEL 140.134 as of 01.01.92
BE42.10-P-1001-08B	Brake disk thickness	New	mm	28	30
		Wear limit	mm	25,4	27,4
		Wear limit for maintenance service	mm	26	28

Check values for front axle brake disks

Number	Designation			MODEL 140.028/042/043/050/051/056/057/063/070/076/135	MODEL 140.032/033 up to 31.12.91
BE42.10-P-1001-08B	Brake disk thickness	New	mm	30	28
		Wear limit	mm	27,4	25,4
		Wear limit for maintenance service	mm	28	26

Check values for front axle brake disks

Number	Designation			MODEL 140.032/033 as of 01.01.92	MODEL 170.435/444/445/447/449
BE42.10-P-1001-08B	Brake disk thickness	New	mm	30	25
		Wear limit	mm	27,4	22,0
		Wear limit for maintenance service	mm	28	23

Check values for front axle brake disks

Number	Designation			MODEL 170.465	MODEL 170.466
BE42.10-P-1001-08B	Brake disk thickness	New	mm	28	32
		Wear limit	mm	25,4	29,4
		Wear limit for maintenance service	mm	26	30

Check values for front axle brake disks

Number	Designation			MODEL 202.018/120/121/122/125TODEL 202.023 as of 01.08.97 with CODE 494	MODEL 202.020/022/078/080/081/083/133/134/180/182/193/194, MODEL 202.023 as of 01.08.97 except CODE 494, MODEL 202.023 up to 31.07.97, MODEL 202.028 up to 31.08.95 except CODE 957
BE42.10-P-1001-08B	Brake disk thickness	New	mm	12	22
		Wear limit	mm	10	19,4
		Wear limit for maintenance service	mm	10,5	20

Check values for front axle brake disks

Number	Designation			MODEL 202.024/025/026/029/082/085/086/087/088/089/128/188, MODEL 202.028 as of 01.09.95 except CODE 957	MODEL 202.028 up to 31.08.95 with CODE 957
BE42.10-P-1001-08B	Brake disk thickness	New	mm	25	30
		Wear limit	mm	22,0	28
		Wear limit for maintenance service	mm	23	28,5

Check values for front axle brake disks

Number	Designation			MODEL 202.028 as of 01.09.95 with CODE 957	MODEL 202.033/093
BE42.10-P-1001-08B	Brake disk thickness	New	mm	28	32
		Wear limit	mm	25,4	30,4
		Wear limit for maintenance service	mm	26	31

Check values for front axle brake disks

Number	Designation			MODEL 208.365/444/445/447/448/465, MODEL 208.370/470 up to 30.06.99	MODEL 208.370/470 as of 01.07.99, MODEL 208.374
BE42.10-P-1001-08B	Brake disk thickness	New	mm	28	32
		Wear limit	mm	25,4	30,4
		Wear limit for maintenance service	mm	26	31

Check values for front axle brake disks

Number	Designation			MODEL 208.335/344/345/347/348/435	MODEL 208.474
BE42.10-P-1001-08B	Brake disk thickness	New	mm	25	32
		Wear limit	mm	22,0	29,4
		Wear limit for maintenance service	mm	23	30

Check values for front axle brake disks

Number	Designation			MODEL 210.003/004/006/007/010/017/020/035/037/048/062/206/210/215/217/235/237/248/262, MODEL 210.061/261 up to 01.07.99 with CODE 472, MODEL 210.061/261 except CODE 472	MODEL 210.055 with CODE 957
BE42.10-P-1001-08B	Brake disk thickness	New	mm	25	28
		Wear limit	mm	22,0	25,4
		Wear limit for maintenance service	mm	23	26

Check values for front axle brake disks

Number	Designation			MODEL 210.015/016/025/026/045/053/063/065/081/082/216/225/226/245/263/265/272/281/282/606/610/616/617/663, MODEL 210.055/072 except CODE 957, MODEL 210.061/261 up to 30.06.99 with CODE 472, MODEL 210.070/270 up to 30.06.99	MODEL 210.070/270 as of 01.07.99, MODEL 210.072 with CODE 957, MODEL 210.074/083/274/283
BE42.10-P-1001-08B	Brake disk thickness	New	mm	28	32
		Wear limit	mm	25,4	29,4
		Wear limit for maintenance service	mm	26	30

Check values for rear axle brake disks

Number	Designation			MODEL 129.058/063/067 as of 9/1/95 except ESP MODEL 129.059/064 except ESP	MODEL 129.067 up to 8/31/95 without ESP
BE42.10-P-1001-09B	Brake disk thickness	New	mm	10	9
		Wear limit	mm	8,3	7,3
		Wear limit for maintenance service	mm	8,8	7,6

Check values for rear axle brake disks

Number	Designation			MODEL 129.059/064/067 with ESP	MODEL 140.028/032/033/134/135
BE42.10-P-1001-09B	Brake disk thickness	New	mm	22	12
		Wear limit	mm	19,4	9,8
		Wear limit for maintenance service	mm	20	10,5

Check values for rear axle brake disks

Number	Designation			MODEL 140.042/043/050/051/056/057/063/070/076	MODEL 170
BE42.10-P-1001-09B	Brake disk thickness	New	mm	22	9
		Wear limit	mm	19,4	7,3
		Wear limit for maintenance service	mm	20	7,6

Check values for rear axle brake disks

Number	Designation			MODEL 202.028 up to 8/31/95 with CODE 957 (AMG engineering package) C 36	MODEL 202.028 as of 9/1/95 with CODE 957 (AMG engineering package) C 36
BE42.10-P-1001-09B	Brake disk thickness	New	mm	24	10
		Wear limit	mm	21,4	8,3
		Wear limit for maintenance service	mm	22	8,8

Check values for rear axle brake disks

Number	Designation			Model 202 except 202.028 with CODE 957 C 36 AMG, except 202.033/093	MODEL 202.033/093
BE42.10-P-1001-09B	Brake disk thickness	New	mm	9	22
		Wear limit	mm	7,3	19,4
		Wear limit for maintenance service	mm	7,6	20

Check values for rear axle brake disks

Number	Designation			MODEL 208.335/344/345/347/348/435	MODEL 208.365/444/445/447/448/465, MODEL 208.370/470 with CODE 494/498/625
BE42.10-P-1001-09B	Brake disk thickness	New	mm	9	10
		Wear limit	mm	7,3	8,3
		Wear limit for maintenance service	mm	7,6	8,8

Check values for rear axle brake disks

Number	Designation			MODEL 208.370/470 except CODE 494, except CODE 498, except CODE 625	MODEL 208.374/474
BE42.10-P-1001-09B	Brake disk thickness	New	mm	22	22
		Wear limit	mm	19,4	19,4
		Wear limit for maintenance service	mm	20	20

Check values for rear axle brake disks

Number	Designation			MODEL 210.061 except ESP	MODEL 210.072 with CODE 957 (AMG engineering package) E 50
BE42.10-P-1001-09B	Brake disk thickness	New	mm	9	22
		Wear limit	mm	7,3	19,4
		Wear limit for maintenance service	mm	7,6	20

Check values for rear axle brake disks

Number	Designation			MODEL 210.061 with ESP MODEL 210.072 without CODE 957 (AMG engineering package) except E 50	MODEL 210.206/210/215/216/217/225/226/235/237/245/248/261/262/263/265/272/281/282/606/610/616/617/663 MODEL 210.270 up to 6/30/99
BE42.10-P-1001-09B	Brake disk thickness	New	mm	10	12
		Wear limit	mm	8,3	9,8
		Wear limit for maintenance service	mm	8,8	10,5

Inspect condition of brake disks

140 589 00 19 00

Caliper gauge

เอกสารที่อ้างถึง