P20.00-2370-08
1 | Cap | 3 | Coolant drain plug | ||||
2 | Radiator | M5 | Electric drive motor |
Danger ! | Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. | |
| Notes on coolant | ||
| Information on preventing damage to electronic components due to electrostatic discharge | ||
Lowering | |||
1 | Remove interior flap above engine | ||
| |||
2 | Turn cap(1) on cooler (2) a half revolution counterclockwise, relieve overpressure and then unscrew cap (1) | ||
Danger ! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by vehicle manufacturer. | |
3 | Raise vehicle with vehicle lift | ||
4 | Remove coolant drain plug (3) on electric motor drive (M5) and relieve coolant | Catch coolant with suitable vessel. | |
Filling | |||
5 | Tighten coolant drain plug (3) on electric motor drive (M5) | Coolant drain plug to engine | |
6 | Lower vehicle with vehicle lift | ||
7 | Bleed cooling system of electric motor drive | ||
| |||
| Coolant specifications | ||
| Anticorrosion/antifreeze agents (Sheet 325.0) | ||
Pressure pump | |||
Filling device | |||
8 | Inspect cooling system for leaks | ||
|
450 589 20 63 00
Filling device
450 589 07 21 00
Pressure pump