1 | Threaded cap |
2 | Sealing ring |
3 | Oil filter element |
4 | Drain screw |
5 | Guide tube |
6 | Engine oil suction unit |
7 | Cap |
N18.00-0277-06
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
Warning | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure it with the safety strut. | |
Topical note | Notes on tilting the cab | ||
Notes on engine oil | |||
Draining | |||
1 | Tilt cab | ||
2 | Replace oil filter element (3) |
| |
Vehicles with code MY8 (Engine oil change interval at 150,000 km) | |||
Dispose of oil filter element (3) properly and in an environmentally-compatible manner. | |||
Oil filter cover to oil filter housing | |||
3 | Detach cap (7) from filler neck | ||
4.1 | Extract engine oil through guide tube of oil dipstick (5) | Extract engine oil only when the engine is at normal operating temperature. | |
Observe the operating instructions provided by the manufacturer of the engine oil extractor. | |||
4.2 | Drain engine oil from drain screw (4) and tighten the drain screw (4) | Only drain engine oil when engine is at normal operating temperature. | |
| |||
Collect oil in a suitable container and allow to drain completely. | |||
Install new sealing ring for drain screw (4). | |||
Oil drain screw to oil pan | |||
Pour in | |||
5 | Check adjusted oil quality in Telligent maintenance system and adjust the quality of the engine oil to be added, if required | ||
6 | Fill engine oil to prescribed filling capacity at the filler neck | Engines 541.9, 542.9Engine oil | |
7 | Attach cap (7) to filler neck | ||
| Check | ||
8 | Start engine, allow it to run for 1 to 2 minutes at idle speed and then switch off engine | | |
Monitor oil pressure indicator. It must indicated oil pressure after a few seconds. | |||
9 | Check oil level after a waiting time of approx. 5 min. on display, correct oil level, if necessary | The waiting time must be maintained. | |
Request engine oil level in displayModel 950, 952, 953, 954 up to vehicle identification end no. 471229 | |||
Request engine oil level in displayModel 950, 952, 953, 954 as from vehicle identification number 471230 | |||
Request engine oil level in displayModel 930, 932, 933, 934 | |||
10 | Fill up reservoir of automatic engine oil replenishment up to the maximum marking | Engine 541.9, 542.9 with code KMB7 (Automatic engine oil refill)Engine oil | |
11 | Check oil filter housing and drain screw (4) for leaktightness | ||
12 | Tilt cab back into driving position |
Engine lubrication |
Number | Designation | Engine 541.9 without code MN9, MY8, without code MS4/5 with light alloy oil pan | Engine 541.9 without code MN9, MY8, with code MS4/5 with light alloy oil pan | ||
BF18.00-N-1001-01B | Engine oil | Filling capacity with oil filter | Liter | 34 | 34 |
Sheet | |||||
Sheet | |||||
Sheet | - | ||||
Sheet | |||||
Sheet | |||||
Engine lubrication |
Number | Designation | Engine 541.9 without code MN9, MY8, without code MS4/5 with thermoplastic oil pan | Engine 541.9 without code MN9, MY8, with code MS4/5 with thermoplastic oil pan | ||
BF18.00-N-1001-01B | Engine oil | Filling capacity with oil filter | Liter | 35 | 35 |
Sheet | |||||
Sheet | |||||
Sheet | - | ||||
Sheet | |||||
Sheet | |||||
Engine lubrication |
Number | Designation | Engine 541.9 without code MN9, MY8, without code MS4/5 with thermoset plastic oil pan | Engine 541.9 without code MN9, MY8, with code MS4/5 with thermoset plastic oil pan | ||
BF18.00-N-1001-01B | Engine oil | Filling capacity with oil filter | Liter | 32 | 32 |
Sheet | |||||
Sheet | |||||
Sheet | - | ||||
Sheet | |||||
Sheet | |||||
Engine lubrication |
Number | Designation | Engine 542.9 without code MY8, without code MS4/5 with thermoset plastic oil pan | Engine 542.9 without code MY8, with code MS4/5 with thermoset plastic oil pan | ||
BF18.00-N-1001-01B | Engine oil | Filling capacity with oil filter | Liter | 38 | 38 |
Sheet | |||||
Sheet | |||||
Sheet | - | ||||
Sheet | |||||
Sheet | |||||