Engine | 104.900 in model 638 |
Engine | 111.948/950/978/980 in model 638 |
Engine | 112.951/976 in model 639 |
Engine | 272 in model 636 |
Engine | 272.978 in model 639 |
Engine | 601.942/970 in model 638 |
Engine | 611.980 in model 638 |
Engine | 642.890/990 in model 639 |
Engine | 646.980 in model 636 |
Engine | 646.980/981/982/983 in model 639 |
Engine | 651 in model 636 |
Engine | 651.940 in model 639 |
Shown on model 638 |
1 | Oil dipstick |
2 | Filler neck |
3 | Drain screw |
4 | Oil filter element |
5 | oil extractor |
A | Engine 111 |
B | Engine 601 |
N18.00-2127-05
Shown on model 638 with engine 611.980 |
1 | Oil dipstick |
2 | Filler neck |
3 | Drain screw |
4 | Oil filter element |
5 | oil extractor |
N18.00-2015-06
Shown on model 638 with engine 104.900 |
1 | Oil dipstick |
2 | Filler neck |
3 | Drain screw |
4 | Oil filter element |
5 | oil extractor |
6 | Oil filter drain screw |
7 | Oil filter cover |
S18.00-4502-06
Shown on model 639 |
1 | Oil dipstick |
2 | Filler neck |
3 | Drain screw |
4 | Oil filter element |
5 | oil extractor |
C | Engine 112 |
D | Engine 646 |
S18.00-4503-06
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Caution | Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil | Wear protective gloves, protective clothing and safety glasses. | |
Topical note | Notes on engine oil and filter changes | ||
| Check | ||
1 | Check adjusted oil quality in maintenance system and adjust the quality of the engine oil to be poured in if necessary | ||
Suction off or extract | |||
2 | Allow engine to warm up | Coolant temperature at least 80 °C. | |
3 | Remove engine cover | ||
| Engine 651 | ||
4 | Replace oil filter element (4) |
| |
Engine 111, 112, 272 | |||
Engine 601, 611, 642, 646 651 | |||
ENGINE 104Oil filter cover to oil filter housing | |||
ENGINE 104Oil drain screw on oil filter cover | |||
Engine 111Oil filter threaded cap | |||
Engine 112Screw cap at oil filter | |||
Engine 272Threaded cap to oil filter housing | |||
Engine 601, 611Oil filter threaded cap | |||
Engine 642, 646Threaded cap to oil filter housing | |||
Engine 651Threaded cap to oil filter housing | |||
Motor 104, 111, 112, 272 , 611, 646, 651 | |||
Motor 601 | |||
Motor 642 | |||
5 | Lift/jack up vehicle | Only when draining engine oil and when no pit is available. | |
| Model 636, 639 | ||
6 | Take off bottom engine compartment paneling at front | Only when draining engine oil. | |
| Model 636, model 639.7/8 as of 055347 | ||
| Model 638 with engine 111 | ||
7.1 | Pull oil dipstick (1) out of oil-dipstick guide tube, wipe with a lint-free cloth and extract engine oil through oil-dipstick guide tube | Only when extracting engine oil. | |
| 000 588 05 82 00 Oil extraction sensor | Engine 642, 646, 651 | |
After extracting, remove oil suction unit (5) again. | |||
7.2 | Position a suitable receptacle under drain screw (3) and drain engine oil | Only when draining engine oil. | |
Installation: Clean drain screw (3) and replace sealing ring. | |||
ENGINE 104Oil drain screw to oil pan | |||
Engine 111Oil drain screw to oil pan | |||
Engine 112Oil drain screw to oil pan | |||
Engine 272Oil drain screw to oil pan | |||
Engine 601, 611, 646Oil drain screw to oil pan | |||
Engine 642Oil drain screw to oil pan | |||
Engine 651Drain screw on oil pan | |||
Pour in | |||
8 | Pour in engine oil at filler neck (2) | ||
Notes on engine oil | |||
Note specified filling capacity. | |||
Engine 104, 112Engine oil | |||
Engine 111Engine oil | |||
Engine 272Engine oil | |||
Engine 601, 611Engine oil | |||
Engine 642, 646, 651Engine oil | |||
9 | Reinstall engine cover | ||
| Engine 651 | ||
| Check | ||
10 | Start engine, allow it to run at idle speed for 1 to 2 minutes and then switch off engine | | |
Note oil pressure warning lamp. It must go off after a few seconds. | |||
11 | Check oil level using oil dipstick (1), correct if necessary | Insert oil dipstick (1) up to end stop in oil-dipstick guide tube and wait for at least 3 s. | |
12 | Fit on lower engine compartment panel at front | Only when the engine oil was drained out. | |
| Model 636, model 639.7/8 as of 055347 | ||
| Model 638 with engine 111 | ||
13 | Reset oil and filter change in the maintenance system | ||
14 | Confirm oil and filter change in maintenance booklet or in Digital Service Booklet (DSB) |
Engine lubrication |
Number | Designation | ENGINE 104.900 | ENGINE 112.951/976 | ||
BF18.00-N-1001-01E | Engine oil | Filling capacity with oil filter | Liter | 6,4 | 10 |
Filling capacity without oil filter | Liter | 5,9 | 9,5 | ||
Specifications for Operating Fluids, Sheet | |||||
Specifications for Operating Fluids, Sheet | |||||
Specifications for Operating Fluids, Sheet | |||||
Filling capacities for engine lubrication system |
Number | Designation | Engine 651 in model 639 except diesel particulate filter | Engine 651 in model 639 with diesel particulate filter | ||
BF18.00-N-1001-01L | Engine oil | Filling capacity (oil and filter change) | Liter | 9,0 | 9,0 |
Sheet | |||||
Sheet | |||||
Sheet | |||||
Sheet | |||||
Sheet | - | ||||
Sheet | - | ||||
Sheet | - | ||||
Sheet | - | ||||
103 589 02 09 00
Wrench socket
606 589 01 09 00
Socket wrench bit
642 589 00 09 00
Socket wrench bit