1 | Oil dipstick |
2 | Cap |
3 | Oil filter screw cap |
4 | Oil filter element |
5 | Sealing ring |
N18.00-0295-06
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
1 | Replace oil filter element (4) | ||
Oil filter cover to oil filter housing | |||
Socket wrench-insert WAF 94_mm (14-edge) | |||
2 | Detach bottom part of soundproofing | When draining engine oil from drain screw. | |
3 | Unscrew cap (2) | ||
4.1 | Remove drain screw of oil pan and drain engine oil | Drain engine oil | |
Only drain engine oil when engine is at normal operating temperature. | |||
4.2 | Pull oil dipstick (1) or stop plug out of oil dipstick tube and extract engine oil through oil dipstick tube. | Suction off engine oil | |
Extract engine oil only when the engine is at normal operating temperature. Observe operator's manual of engine oil extractor. | |||
5.1 | Tighten drain screw of oil pan | Drain engine oil | |
Replace sealing ring for drain screw. | |||
Oil drain screw to oil pan | |||
5.2 | Insert oil dipstick (1) or stop plug into oil dipstick tube | Suction off engine oil | |
Only if the engine oil was extracted through the oil dipstick tube. | |||
6 | Pour in the specified filling capacity of engine oil at the oil filler opening | ||
Notes on engine oil | |||
Engine oil | |||
7 | Screw on cap (2) | ||
| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
8 | Start engine, run for 1 to 2 minutes at idle speed and then switch off engine. | Monitor oil pressure indicator. It must indicated oil pressure after a few seconds. Do not rev up engine as long as no oil pressure is indicated. | |
9 | Check/correct oil level after a waiting time of approx. 5 min | The waiting time of 5 min must be maintained. | |
10 | Check oil filter screw cover (3) and drain screw for leak tightness | ||
11 | Attach bottom section of noise encapsulation | Only when the engine oil was drained out. |
366 589 01 07 00
Socket wrench-insert WAF 94_mm (14-edge)