All lines and hoses, sensor cables - Check leaktightness and condition

AP00.20-D-0051A

All lines and hoses, sensor cables - Check leaktightness and condition

29.03.2018

Model

636

Model

638

Model

639

except code MA0 (E-CELL 60 kW)

Model

667, 668, 670

Model

690.6

Model

901, 902

Model

903, 904, 905

except code ZU7 (National version for Canada)

except code ZU8 (National version for USA)

except code ZU9 (National version for Mexico)

except Minibus Sprinter

Model

903.61/62/66/67, 904.61/62/66

with code ZU9 (National version for Mexico)

except code ZU7 (National version for Canada)

except code ZU8 (National version for USA)

Model

903.61/66/67, 904.61/66

with code ZU7 (National version for Canada)

except code ZU8 (National version for USA)

except code ZU9 (National version for Mexico)

Model

903.61/66/67, 904.61/66

with code ZU8 (National version for USA)

except code ZU7 (National version for Canada)

except code ZU9 (National version for Mexico)

Modification notes

28.03.2018

Zulässiger Druckverlust (Messdauer 10 min)

Typ 905.### ## bis 465741

BE42.10-N-1002-10A



Check

1

Check all lines, hoses and cables.

 Check the engine, clutch system, fuel system, cooling system and brake system as well as the signal cables for ABS, ESP® and brake wear indicator for leaks, damage and correct routing.

If damage or defects are found,



Rectify damage or defects.

 Subject to separate repair order.

2

Check brake hoses for damage.

Model 638

AP00.20-D-0051-01A

If damage or defects are found,



Replace brake hoses.

 Subject to separate repair order.

3

Secure vehicle against rolling away and release parking brake.

Only vehicles with pressure brake system.

4

Check pressure loss of compressed-air system.

 Reservoir pressure must be at least 8 bar.

MODEL 668, 670Permissible pressure loss (measurement duration 10 min.)

*BE42.10-N-1002-10C

MODEL 905Permissible pressure loss (measurement duration 10 min)

*BE42.10-N-1002-10A

If compressed air loss is higher,



correct compressed air loss.

 Subject to separate repair order.

Test and adjustment values for service brake

Number

Designation

Model 905.### ## up to 465741

Model 905.### ## as of 465742

BE42.10-N-1002-10A

Permissible pressure loss (measurement duration 10 min)

bar

 0,1

 0,1

Test and adjustment values for service brake

Number

Designation

Model 668.### ## up to 123600, 670.### ## up to 123600
with code B16 (Brake hydraulic 2-circuits/compr.-air 2-circuits)
Steel suspension on solo vehicle

Model 668.### ## as of 123601 up to 131964, 670.### ## as of 123601 up to 131964
with code B16 (Brake hydraulic 2-circuits/compr.-air 2-circuits)
Steel suspension on solo vehicle

BE42.10-N-1002-10C

Permissible pressure loss (measurement duration 10 min.)

bar

0,1

0,1

Test and adjustment values for service brake

Number

Designation

Model 668.### ## as of 131965 up to 134642, 670.### ## as of 131965 up to 134642
with code B16 (Brake hydraulic 2-circuits/compr.-air 2-circuits)
Steel suspension on solo and tractor vehicle

Model 668.### ## as of 134643, 670.### ## as of 134643
with code B16 (Brake hydraulic 2-circuits/compr.-air 2-circuits)
Steel suspension on solo and tractor vehicle

BE42.10-N-1002-10C

Permissible pressure loss (measurement duration 10 min.)

bar

0,1

0,1

Test and adjustment values for service brake

Number

Designation

Model 668.### ## up to 123600, 670.### ## up to 123600
with code B16 (Brake hydraulic 2-circuits/compr.-air 2-circuits)
with code B43 (Trailer brake, 2-line)
Steel suspension on tractor vehicle

Model 668.### ## as of 123601 up to 131964, 670.### ## as of 123601 up to 131964
with code B16 (Brake hydraulic 2-circuits/compr.-air 2-circuits)
with code B43 (Trailer brake, 2-line)
Steel suspension on tractor vehicle

BE42.10-N-1002-10C

Permissible pressure loss (measurement duration 10 min.)

bar

0,1

0,1

Test and adjustment values for service brake

Number

Designation

MODEL 668.### ## up to 076160, 670.### ## up to 076160 with CODE B16 (2-circuit hydraulic / 2-circuit compressed air brake) with CODE CE2 (Rear air suspension) or CODE CE3 (Front and rear air suspension) with Paul air suspension

MODEL 668.### ## as of 076161 up to 123600, 670.### ## as of 076161 up to 123600 with CODE B16 (2-circuit hydraulic / 2-circuit compressed air brake) with CODE CE2 (Rear air suspension) or CODE CE3 (Front and rear air suspension) with MB air suspension

BE42.10-N-1002-10C

Permissible pressure loss (measurement duration 10 min.)

bar

0,1

0,1

Test and adjustment values for service brake

Number

Designation

MODEL 668.### ## as of 123601 up to 131964, 670.### ## as of 123601 up to 131964 with CODE B16 (2-circuit hydraulic / 2-circuit compressed air brake) with CODE CE2 (Rear air suspension) or CODE CE3 (Front and rear air suspension) MB air suspension

MODEL 668.### ## as of 131965 up to 134642, 670.### ## as of 131965 up to 134642 with CODE B16 (2-circuit hydraulic / 2-circuit compressed air brake) with CODE CE2 (Rear air suspension) or CODE CE3 (Front and rear air suspension) with MB air suspension

BE42.10-N-1002-10C

Permissible pressure loss (measurement duration 10 min.)

bar

0,1

0,1

Test and adjustment values for service brake

Number

Designation

MODEL 668.### ## as of 134643, 670.### ## as of 134643 with CODE B16 (2-circuit hydraulic / 2-circuit compressed air brake) with CODE CE2 (Rear air suspension) or CODE CE3 (Front and rear air suspension) with MB air suspension

BE42.10-N-1002-10C

Permissible pressure loss (measurement duration 10 min.)

bar

0,1