AD07.61-P-6001-09B | Crankshaft position sensor Checking electrical components for the ME-SFI ignition system |
| Scope of testing | Test instrument/test connection | Operation/ Preconditions | Specified value | Possible cause/ Remedy | ||
1.0 | Crankshaft position sensor (L5) Signal Voltage |
93 (37E) 93 (37E) | N3/10 N3/10 |
94 (38E) 94 (38E) |
Checking with oscilloscope Starter: Actuate Engine: at idle Check with the multimeter; only perform if there is no oscilloscope available. Starter: Actuate Engine: at idle |
Signal see > 2.0 V > 5 V Increasing rpm, increasing voltage | 1.1 Teeth on the clutch plate |
1.1 | Resistance of L5 |
93 (37E) | N3/10 |
94 (38E) | Ignition: OFF: Detach coupling E from ME-SFI control unit (N3/10). |
(at 20°C) 600 - 1200 Ω | Cable L5 |