Check values for valves |
Number | Designation | ENGINE 601, 602.91, 603.91 | ENGINE 602.96, 603.96 | ||
BE05.30-P-1001-01D | Valve disk Ø (D) | Outlet | mm | 34,90...35,10 | 34,90...35,10 |
Inlet | mm | 37,90...38,10 | 37,90...38,10 | ||
For picture, see | |||||
BE05.30-P-1002-01D | Height of valve disk (h) | New exhaust value | mm | 1,75...2,05 | 1,75...2,05 |
Exhaust limit value | mm | 1,6 | 1,6 | ||
New intake value | mm | 1,75...2,05 | 1,75...2,05 | ||
Intake limit value | mm | 1,6 | 1,6 | ||
For picture, see | |||||
BE05.30-P-1003-01D | Valve seat angle (α) | Outlet | ° | 45° +15' | 45° +15' |
Inlet | ° | 45° +15' | 45° +15' | ||
For picture, see | |||||
BE05.30-P-1004-01D | Valve stem Ø (D 1) | Outlet | mm | 8,945...8,960 | 8,945...8,960 |
Inlet | mm | 7,955...7,970 | 7,955...7,970 | ||
For picture, see | |||||
BE05.30-P-1005-01D | Reinforced valve seat without 1 with 2 | Outlet | 2 | 2 | |
Inlet | 2 | 2 | |||
BE05.30-P-1006-01D | Sodium filling without 1 with 2 | Outlet | 1 | 2 | |
Inlet | 1 | 2 | |||
BE05.30-P-1007-01D | Length of valve (L) | Exhaust series | mm | 106,4 | 106,4 |
Exhaust rep. | mm | 105,5 | 105,5 | ||
Inlet series | mm | 106,4 | 106,4 | ||
Inlet rep. | mm | 105,5 | 105,5 | ||
For picture, see | |||||
BE05.30-P-1008-01D | Valve seat width | Outlet | mm | 2 | 2 |
Inlet | mm | 2 | 2 | ||
BE05.30-P-1009-01D | Concentricity of valve seat to valve stem | Outlet | mm | 0,03 | 0,03 |
Inlet | mm | 0,03 | 0,03 | ||
BE05.30-P-1010-01D | Identification on end of stem | Outlet | A 601 05 | E 601 15 bzw. E 601 17 | |
Inlet | E 601 02 | A 601 19 bzw. A 601 23 | |||