AR09.20-D-1320A | Installing, removing the mixing chamber | 13.8.97 |
ENGINE 601.943 in MODEL 901, 902, 903, 904
D09.20-0010-05
1 Mixing chamber
2 Gasket
3 Hexagon socket bolt
4 Air intake pipe
5 Exhaust gas recirculation valve
6 Gasket
7 Vacuum pipe
8 Torx bolt
9 Corrugated pipe
10 Clips
| Removing, installing | ||
1 | Detach air intake pipe (4) at mixing chamber (1) | ||
2.1 | Detach vacuum pipe (7) at EGR valve (5) | Only if engine fitted with EGR | |
3.1 | Slacken clips (10) and remove corrugated pipe (9) | Only if engine fitted with EGR | |
4.1 | Detach EGR valve (5) at mixing chamber (1) | Only if engine fitted with EGR | |
Installation: replace gasket (6) | |||
5 | Remove mixing chamber (5) | | |
Installation: replace gasket (2); pay attention to locating points of seal (arrows) | |||
6 | Install in the reverse order |
Intake manifold, intake manifold preheater