Shown on model 944 |
1 | Cylinder head cover |
2 | Seal |
W01.20-1018-11
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
Warning | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure it with the safety strut. | |
Topical note | Notes on tilting the cab | ||
| Remove/install | ||
1 | Tilt the cab. | Installation: Only tilt back cab after the leak test. | |
2 | Remove cylinder head cover (1). | Installation: Make sure that the seal (2) is seated correctly. | |
Bolt, plastic cylinder head cover to cylinder head | |||
3 | Remove seal (2). | Installation: Clean the sealing surfaces of cylinder head cover (1) and the cylinder head. | |
4 | Install in the reverse order. | ||
5 | Allow engine to run and check area of the cylinder head cover (1) for leak tightness. | Visual inspection. |