P32.25-A017-09
Shown on model 222 except code 487 (Active Body Control (ABC)) |
1 | Front elastomer bearing | 4 | Front air spring | |
2 | Front shock absorber | 5 | Front boot | |
3 | Front electric lines | 12 | Front electrical connectors |
P32.25-A018-09
Shown on model 222 except code 487 (Active Body Control (ABC)) |
6 | Rear electrical connectors | 9 | Rear boot | |
7 | Rear electric lines | 10 | Rear air spring | |
8 | Rear shock absorbers | 11 | Rear elastomer bearing |
P32.25-A021-08
Shown on model 222 with code Z07 (Highest protection) and except code 487 (Active Body Control (ABC)) |
20 | Steel spring | 21 | Spring retainer |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Warning | Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | |
Preparatory activity | |||
1 | Lift vehicle with lifting platform. | ||
| |||
| Check | ||
2 | Check front shock absorbers (2) for leaks. | ||
If necessary, use commercially available devices/tools. | |||
If problems occur, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
3 | Check front air springs (4) for damage and leaks. | If necessary, use commercially available devices/tools. | |
If problems occur, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
4 | Check that front boots (5) are correctly seated and are not damaged. | If necessary, use commercially available devices/tools. | |
If problems occur, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
5 | Check front elastomer bearings (1) for cracks, deformation and wear; also check for play by firmly pulling and pushing on front shock absorbers (2). | ||
If necessary, use commercially available devices/tools. | |||
The front elastomer bearings (1) must be seated with zero clearance in the housing eye and they may not be cracked or damaged. | |||
If problems occur, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
6 | Check front electrical connectors (12) for damage and correct seating on front shock absorbers (2). | If necessary, use commercially available devices/tools. | |
If problems occur, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
7 | Check front electric lines (3) for damage, routing and mounting. | If necessary, use commercially available devices/tools. | |
If problems occur, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
8 | Check rear shock absorbers (8) for leaks. | ||
If necessary, use commercially available devices/tools. | |||
If problems occur, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
9 | Check rear air springs (10) for damage and leaks. | If necessary, use commercially available devices/tools. | |
If problems occur, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
10 | Check that rear boots (9) are correctly seated and are not damaged. | If necessary, use commercially available devices/tools. | |
If problems occur, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
11 | Check rear elastomer bearings (11) for cracks, deformation and wear; also check for play by firmly pulling and pushing on rear shock absorbers (8). | ||
If necessary, use commercially available devices/tools. | |||
The rear elastomer bearings (11) must be seated with zero clearance in the housing eye and they may not be cracked or damaged. | |||
If problems occur, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
12 | Check rear electrical connectors (6) for damage and correct seating on rear shock absorbers (8). | If necessary, use commercially available devices/tools. | |
If problems occur, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
13 | Check rear electric lines (7) for damage, routing and mounting. | If necessary, use commercially available devices/tools. | |
If problems occur, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
14 | Check that rear steel springs (20) are not damaged and are correctly seated in spring retainers (21). | Model 222 | |
If necessary, use commercially available devices/tools. | |||
If problems occur, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
Finishing activity | |||
15 | Lower vehicle with vehicle lift. | ||
|