Commercially available tools
Number | Designation | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1021-04A | Cutting disk, dia. 65 mm, 80 m/s (max. 23,500 rpm) | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) | |
WH58.30-Z-1001-40A | Tarp (fire-resistant) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
L63.10-0198-06
1 Cut side wall off along dotted line with body saw.
Mark separating cut of side wall and reinforcement to match removed side wall and reinforcement.
2 Drill holes for rivet connections in areas A and E.
Drill rivet holes when fitting side wall on vehicle.
3 Grind connection surfaces down to bare metal on both sides in areas B to D.
4 Coat spot welded flanges on inside with zinc-dust paint in area C.
5 Grind spot weld flanges down to bare metal on both sides in shaded areas. Coat insides of spot weld flanges with zinc dust paint.
Do not grind connection flanges on model 414.600 down to bare metal on both sides in areas H and J.
6 After fitting the side wall and reinforcement to the vehicle, drill 4 mm holes in areas F and G. Countersink these holes on one side with an 8 mm bit. Countersink alternately from inside and outside.